MitsuStyle - View Single Post

santa · 05-15-2008

I have a 2.4L block that is already .20 over, with oil squirter's machined into it and it has been align honed, decked, and new frost plugs put in. Its a 6 bolt block/crank. The block will need to be bored it has a few scratches that will not come out with just a hone job. The crank will need to be turned on the rod journals. It will come with arp head studs, and the arp main studs in it as well. Make me a offer!! Pictures upon request.

05-15-2008	#1
santa Boost Spike Join Date: Oct 2003 Location: Cottage Grove Drives: 93 talon Automagickinda.... Posts: 1,116	2.4L block and crank I have a 2.4L block that is already .20 over, with oil squirter's machined into it and it has been align honed, decked, and new frost plugs put in. Its a 6 bolt block/crank. The block will need to be bored it has a few scratches that will not come out with just a hone job. The crank will need to be turned on the rod journals. It will come with arp head studs, and the arp main studs in it as well. Make me a offer!! Pictures upon request. __________________ 91 gsx: 734awhp 593ft lbs, best et 10.4@141, @35psi 1.6 60' 2010 93 Talon: 2011 season: Auto, 8.50 cage, For sale!!! $7500 Last edited by santa; 05-15-2008 at 12:06 PM..