MitsuStyle - View Single Post - project reach-around

craig · 03-29-2009

well I got a mech water temp gauge at work and plugged it in just to check, the sock gauge is completely wrong reads about 100 degrees higher than it should be so the radiator is good. the brakes are better after flushing the system out and then putting return springs on the e-brake arms. The rear pass side still hangs a lil though but not like it was.

my dad has been playing with the carb jetting it up and it ts running a lot better then it was just some playing with is to see what we can do to make it better and start adding timing.

03-29-2009	#99
craig wants to kick mark Join Date: Sep 2006 Location: No Hope Drives: Battery with wheels Posts: 1,064	Re: project reach-around well I got a mech water temp gauge at work and plugged it in just to check, the sock gauge is completely wrong reads about 100 degrees higher than it should be so the radiator is good. the brakes are better after flushing the system out and then putting return springs on the e-brake arms. The rear pass side still hangs a lil though but not like it was. my dad has been playing with the carb jetting it up and it ts running a lot better then it was just some playing with is to see what we can do to make it better and start adding timing. __________________ Fast, Cheap, Reliable. Pick 2.