MitsuStyle - View Single Post

tpunx99GSX · 02-03-2010

Addendum to phase 1. Also need to replace a piston.

Its cracked right on the one of the holes that the wrist pin goes through. YAY.

Im about 99% sure the valves are not bent. BUT, and im doubting this will affect anything, The piston slapped the head and left a mark on the head where it goes flat on the intake side, the mark is very slight and there is no cracks there. I should really take pictures and post them up. The rod was really fucked up.

02-03-2010	#6
tpunx99GSX Tournaments Won: 3 Join Date: Oct 2003 Location: Maple Grove, MN Drives: Lancer and Durango Posts: 7,017	Re: 1992 Eagle Talon TSI Project Addendum to phase 1. Also need to replace a piston. Its cracked right on the one of the holes that the wrist pin goes through. YAY. Im about 99% sure the valves are not bent. BUT, and im doubting this will affect anything, The piston slapped the head and left a mark on the head where it goes flat on the intake side, the mark is very slight and there is no cracks there. I should really take pictures and post them up. The rod was really fucked up. __________________ Scientific theories are the most reliable, rigorous, and comprehensive form of scientific knowledge. This is significantly different from the common usage of the word "theory", which implies that something is a conjecture, hypothesis, or guess.