MitsuStyle - View Single Post

C3L1CA · 12-17-2010

It will not matter if some one is pushing on the hub or not. The axle would have to move in order for it to pushing on the transmission.

I had this happen on both my dsm's. First one I just pulled the whole knuckle like you guys did and the damn thing wouldn't even press out. I had to get a whole new axle/hub setup. Actually same thing happened on my other car as well.

Just keep hitting it with PB blaster and try an air hammer. Eventually it SHOULD break loose.

12-17-2010	#29
C3L1CA N17r0U$ br4D Goosehead Racing Champion! Street Drifting Champion! Tournaments Won: 1 Join Date: Apr 2007 Location: Oakdale, MN Drives: bikes and a silveraydo Posts: 2,749	Re: cant remove axel from hub.... need help! It will not matter if some one is pushing on the hub or not. The axle would have to move in order for it to pushing on the transmission. I had this happen on both my dsm's. First one I just pulled the whole knuckle like you guys did and the damn thing wouldn't even press out. I had to get a whole new axle/hub setup. Actually same thing happened on my other car as well. Just keep hitting it with PB blaster and try an air hammer. Eventually it SHOULD break loose. __________________ My rice rocket best times Pump Gas: 8.85 @ 152.3 in 2016 Race Gas: 8.982 @ 152.16 in 2014