|
Re: cant remove axel from hub.... need help!
Quote:
Originally Posted by tpunx99GSX
i realise that. on dsms if you had everything unbolted and started smacking the axel on the end of it, (which the transmission side still in) all it would do is drill the axle into the tranny.
Again this was on a dsm, im not sure how evos look under there. have you taken the hub side boot off and axle out? so that all your hitting is the end of the axle? (btw those ends are surprizingly cheap to replace on dsms)
|
Same difference, but it would still break it loose. We tried removing the knuckle from the strut and bracing the knuckle against the frame with no luck as well.
__________________
"If everything seems under control, you're just not going fast enough." -Mario Andretti
03 Mitsubishi Lancer Evolution VIII
Quote:
Originally Posted by Tachyon
Every minute you spend in your Evo, not in boost, is a minute of your life you'll never get back.
|
|