Quote:
Originally Posted by Kracka
Looking at your pictures, MAP could easily just lop off that whole lower porting of the aluminum adapter to save on materials, cost, etc.
|
Actually the pump slides down in there and there is a small bevel at the bottom to keep the pump from sliding all the way through. Then there are a few set screws/locknuts on the side (that hold that plastic ring as well) to keep it from spinning within the housing.
My only complaint (and this will be no different from any other pump kit) is how the filter gets smashed up inside of the plastic housing...the stock pump has a round filter on it, if they could find one that worked for this application it would be awesome!