I was able to drive the car up to the MitsuStyle dyno day for some motor break in miles. Its about a 16mile round trip and the car drove it with out a hitch. My friend Ryan was able to ride with me for the cars first drive this year.
A few things I learned on this drive, the cold can be an issue, as I do not have a blower motor or heater core.
The coolant temps do not stay above 180 while driving down the road at high way speed, and if I turn the radiator fan an the coolant temps drop quick.
The oil temps even with running about 30psi less oil pressure then last year are up around 30-40 deg F while driving around, it was about 200 deg driving home, which any good synthetic oil can handle with out an issue. So we can see a big change in adding this much hard block to the motor, the oil is doing a lot more cooling then last year. And if the oil temps get hotter then 220 while dynoing I will just add an oil cooler and that should take care of the oil temps.
I will have some dyno time setup for later this week, then there are a few days at Grove Creek before the end of the month, I want to get the 60' working before we head back to Rock Falls, which there is a day on June 4th at the Rock I would like to get to, but we will see.
~John