MitsuStyle - View Single Post - Turbo for DSM, that makes full boost from 4000-8500+RPMS?

C3L1CA · 10-19-2011

Yea I don't think I would do the hta upgrade again, didn't seem worth it unless you bought a used one with the upgrade already.

Boost/power dropped a little bit at the end but you can see it spiked to 38 or so and leveled off. That was the highest we ever had it spiked and if we kept it at 30 it would have a super flat boost curve. It also only had a .9 bar spring in the wastegate too. Maybe if it had a stronger spring it could of held more boost up top and made more power. We never really got it back on the dyno before it got parted out.

10-19-2011	#27
C3L1CA N17r0U$ br4D Goosehead Racing Champion! Street Drifting Champion! Tournaments Won: 1 Join Date: Apr 2007 Location: Oakdale, MN Drives: bikes and a silveraydo Posts: 2,749	Re: Turbo for DSM, that makes full boost from 4000-8500+RPMS? Yea I don't think I would do the hta upgrade again, didn't seem worth it unless you bought a used one with the upgrade already. Boost/power dropped a little bit at the end but you can see it spiked to 38 or so and leveled off. That was the highest we ever had it spiked and if we kept it at 30 it would have a super flat boost curve. It also only had a .9 bar spring in the wastegate too. Maybe if it had a stronger spring it could of held more boost up top and made more power. We never really got it back on the dyno before it got parted out. __________________ My rice rocket best times Pump Gas: 8.85 @ 152.3 in 2016 Race Gas: 8.982 @ 152.16 in 2014