MitsuStyle - View Single Post

blesi660r · 07-15-2013

Ok I found my specs that I was able to get by measuring the cam lobe

intake and exhaust.
cam lift- .221
net lift- .375/9.525 mm

exhaust is only a few thousandths different from the intake

I was looking at maybe the BC springs and titanium retainers.
valves are not in the buget as of right now ,but I might be able to get a set if I hold off on assembly for a month or two...

07-15-2013	#7
blesi660r Join Date: Nov 2006 Location: north branch mn Drives: 07-gsxr 750, 93 talon tsi awd Posts: 554	Re: valve spring Q Ok I found my specs that I was able to get by measuring the cam lobe intake and exhaust. cam lift- .221 net lift- .375/9.525 mm exhaust is only a few thousandths different from the intake I was looking at maybe the BC springs and titanium retainers. valves are not in the buget as of right now ,but I might be able to get a set if I hold off on assembly for a month or two... __________________ Just couldn't stay away. Last edited by blesi660r; 07-15-2013 at 01:34 AM..