[goodhart]

I also wanted to drill out the head bolt holes to 1/2" to accommodate the bigger 1g head bolts, and tap and plug the egr hole on the intake side of the head, but couldn't find a drill bit long enough for the press and I don't have a 1/4" npt tap for the egr. The local hardware store wanted $8 for a 1/4 npt tap and didn't have the style plug I wanted so I will just have Gosh do those two things for me.

My list of things for Gosh to do to the head:

- Bore head bolt holes to 1/2"
- Tap and plug EGR hole
- Re-surface
- Hot tank