Quote:
Originally Posted by Shane@DBPerformance
If I am reading this right and the arm was removed to allow the flapper to open all the way right away, then you have bad boost creep. The fix would be a larger flapper and porting or an external wastegate. Another option is to choke the exhaust or intake system so that the turbo has a hard time making boost, which obviously isn't the best option for power.
|
Yes you are right i removed the arm, and gave her throttle and at about 6k had about 25 pounds of boost. Im debating on going with a larger flapper, but would like to go with a external wastage set up. But don't really have the money for that. For a proper external waste gate would you go off the manifold or the o2 housing? And i would need to weld that flapper hole shut.