MitsuStyle - View Single Post

**JET** · 02-19-2005

2600's work just fine if the rest of the system is up to par. The problem is usually a worn clutch fork/pivot ball or the pedal assembly. I am pretty sure it is a 1g, so there is no restrictor in the line. The SS line on a 1g doesn't do much (I have one).

Bleed the system, then adjust the rod that is right by the top of the accelerator pedal. If that doesn't do it, it is probably your pedal assembly, check that.

02-19-2005	#11
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: act2600 car slipping at 4500rpm?? 2600's work just fine if the rest of the system is up to par. The problem is usually a worn clutch fork/pivot ball or the pedal assembly. I am pretty sure it is a 1g, so there is no restrictor in the line. The SS line on a 1g doesn't do much (I have one). Bleed the system, then adjust the rod that is right by the top of the accelerator pedal. If that doesn't do it, it is probably your pedal assembly, check that. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!