MitsuStyle - View Single Post

**JET** · 03-28-2005

There should be an adapter in the EGT package that screws into the manifold. There shouldn't be any welding involved. Also, to drill the hole just take out all the turbo bolts, then put some flat metal over the turbo inlet, and start the car. Then drill out your hole and you are set, you don't need to take off the manifold.

03-28-2005	#16
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: To Tube, or not to Tube.. There should be an adapter in the EGT package that screws into the manifold. There shouldn't be any welding involved. Also, to drill the hole just take out all the turbo bolts, then put some flat metal over the turbo inlet, and start the car. Then drill out your hole and you are set, you don't need to take off the manifold. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!