MitsuStyle - View Single Post

slowbubblecar · 04-13-2005

you can cut the opening bigger in the front bumper and make another spot for the front plate. In the cuting you will most likely neet to cut the inside part out and you might want to cut more of the bumper out but it isn't needed. For the front plate, I went to the hardware store and bought some plate fasteners there. It comes with screws and clips to screw them into. I just drilled holes in my bumper a little smaller than the clips, put the clips in and put the plate on. It is pretty easy

04-13-2005	#4
slowbubblecar Big Turbo Monster Join Date: Oct 2003 Location: Hopkins Drives: GTS and E55 Posts: 1,105	Re: 2g bumper license plate removal you can cut the opening bigger in the front bumper and make another spot for the front plate. In the cuting you will most likely neet to cut the inside part out and you might want to cut more of the bumper out but it isn't needed. For the front plate, I went to the hardware store and bought some plate fasteners there. It comes with screws and clips to screw them into. I just drilled holes in my bumper a little smaller than the clips, put the clips in and put the plate on. It is pretty easy __________________ Life's tough.... it's even tougher if you're stupid. 7/25/09 Motorcycle cop pulls up next to me on UNI and says "Want to race?" Me- "I don't think you would stand a chance." Cop says "probably not" and drives off.