MitsuStyle - View Single Post - Front Half-shaft Issues...NEED ADVICE PLEASE

TGPilot · 05-28-2005

Well got the oil pan and half-shafts done today! It was a bitch and a half trying to get the circlips to let go of the inner portion of the shafts...but went back together easier than coming apart.

For everyone's info if you care...NAPA p/n's for the half shafts are:

non-NAPA p/n 40-14010 for right front
non-NAPA p/n 40-19281 for left front

Only thing that mattered was that it is an AWD Manual tranny. They list as a NON-ABS axle...but as I found out the ABS clip is on the hub...not the axle itself.

Thanks for everyone's input and help!

-Kenny

05-28-2005	#13
TGPilot Join Date: Dec 2004 Location: Colorado Springs, CO Posts: 63	Re: Front Half-shaft Issues...NEED ADVICE PLEASE Well got the oil pan and half-shafts done today! It was a bitch and a half trying to get the circlips to let go of the inner portion of the shafts...but went back together easier than coming apart. For everyone's info if you care...NAPA p/n's for the half shafts are: non-NAPA p/n 40-14010 for right front non-NAPA p/n 40-19281 for left front Only thing that mattered was that it is an AWD Manual tranny. They list as a NON-ABS axle...but as I found out the ABS clip is on the hub...not the axle itself. Thanks for everyone's input and help! -Kenny __________________ Showing N/A cars just how slow they are at 6000' above sea-level! 1990 Pontiac Grand Prix Turbo Coupe 222HP / 320ft.lbs @ 3700 RPM 1990 Pontiac Grand Prix Turbo STE 222wHP and 280ft/lbs @ 3850 RPM