MitsuStyle - View Single Post

niterydr · 06-21-2005

yeah, 1500 square feet workable, 300 office/parts showroom/bathroom, with overhead on the 300 square feet.
We have a 10hp, 3 phase 208v, 35cfm air compressor (35cfm@175psi) with 2 1/2" 50' drop auto-wind reels, 2-3/8" 50' length manual wind up reals (mill area/porting area) dedicated line for the plasma, and one for the sand blaster(s) (they share one common feed).
plus the main lines are 3/4" that feed all the air lines.
Thanks for the compliments guys, but the pictures do suck (or so I think, as I can't view them other than on my computer!).

06-21-2005	#15
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: Shop pictures yeah, 1500 square feet workable, 300 office/parts showroom/bathroom, with overhead on the 300 square feet. We have a 10hp, 3 phase 208v, 35cfm air compressor (35cfm@175psi) with 2 1/2" 50' drop auto-wind reels, 2-3/8" 50' length manual wind up reals (mill area/porting area) dedicated line for the plasma, and one for the sand blaster(s) (they share one common feed). plus the main lines are 3/4" that feed all the air lines. Thanks for the compliments guys, but the pictures do suck (or so I think, as I can't view them other than on my computer!). __________________ My street car runs low 11's and my race car's personal best is a mid 11....