MitsuStyle - View Single Post

A//// Guy · 08-17-2005

When you take it apart you need to spin the needle counterclockwise all the way around and back to 0. The needle can only go from a 0-145 radius, so if its off it will go further (like in your case) or higher than 0 if its off. Its strange that both off them do that though.

Did you take the clusters apart? I would take it apart and reset the needle, just be VERY careful not to hit the coolant or oil or fuel needles because they are very touchy and can move by themselves if you tap the case even a little.

08-17-2005	#2
A//// Guy Bloody Seal Bounce Champion! Join Date: Oct 2003 Location: South Burbs Drives: Slowly Posts: 9,870	Re: 1g Dash/speedo When you take it apart you need to spin the needle counterclockwise all the way around and back to 0. The needle can only go from a 0-145 radius, so if its off it will go further (like in your case) or higher than 0 if its off. Its strange that both off them do that though. Did you take the clusters apart? I would take it apart and reset the needle, just be VERY careful not to hit the coolant or oil or fuel needles because they are very touchy and can move by themselves if you tap the case even a little.