|
Re: Dave's Evo X Build/The Life of Dave blog
If they have jack stand you're golden. Torque wrench for the wheels is highly recommended but it certainly shouldn't stop you from trying to fix this. Getting them back on good & tight (and extra snug to be sure, but don't hang on the wrench) should be fine. Go get some brake fluid, a tube, and a 20 oz of mt dew and you're set. the bleeder valves are 11mm on the brakes and 10mm on the slave cyl. Follow the directions hughes posted above for the brakes and then do a good bleed on the clutch as well (I posted on evoM howto do this recently, I can repost if you need, or just call me when you're doing it).
All you need is a helper, a girl or your dad or whoever will do fine.
__________________
Quote:
Originally Posted by Murlo26
I need to listen to Scheides more often i think :)
|
Quote:
Originally Posted by turbotalon1g
...I realized that I can't keep up my shit talking without anything to back it up.
|
Quote:
|
Originally Posted by JV
S2000: For those of us that know the Miata is the best car on the planet, but also want extra power and to not have to turn in our man cards.
|
|