MitsuStyle - View Single Post

mark4g63t · 01-03-2016

Anyone have any experience degreeing cams/ have the equipment to do so? Is it necessary?

I've been reading and a big discussing has been coming up. To degree my cams or not. I will be running a 6 bolt block wiseco HD 10.5:1 with eagle h beams and 2g head with Manley springs, comp 272's and stock valves thus far.
Previously I had 6 bolt with 1g rods 2g pistons and a stock head with the comp 272s in it with the cams not degreed on stock cam gears.
I don't want to run into any issues.

What are people's experience with this topic?

01-03-2016	#1
mark4g63t Join Date: Jun 2012 Location: Twin Cities Drives: 95 Talon TSI Posts: 941	Degreeing Cams Anyone have any experience degreeing cams/ have the equipment to do so? Is it necessary? I've been reading and a big discussing has been coming up. To degree my cams or not. I will be running a 6 bolt block wiseco HD 10.5:1 with eagle h beams and 2g head with Manley springs, comp 272's and stock valves thus far. Previously I had 6 bolt with 1g rods 2g pistons and a stock head with the comp 272s in it with the cams not degreed on stock cam gears. I don't want to run into any issues. What are people's experience with this topic? __________________ BW8776, e-85