MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 06-22-2006   #1
snea
 

Join Date: Dec 2005
Posts: 44
Antifreeze in my intake?!?

I replaced the turbo a few months ago and it was, by one way or another, ingesting COOLANT... Sorry, I'll stop my rant...

I have a 95 Talon Tsi AWD. I bought this car from a "friend" about six months ago. He had spun the turbo, and that is all I knew. I found a used turbo that I bought and installed. When I started it, it was burning coolant at the rate of about a quarter to a half gallon a minute. I did a leakdown test, it gave all the sighns of having a cracked block and I was 95% sure of it. So I set it aside for spring planting season.

I've finaly had the chance to start tearing things apart, and I find fresh, clean coolant in my upper intake hose. Despite working on the farm for many years and having a basic knowledge of mechanics(about as good as my brother who is a john deere technition), I am completely stumped.

Please help me.
snea is offline   Reply With Quote
Old 06-22-2006   #2
Thor06
11 Seconds to Freedom
 
Thor06's Avatar
 

Join Date: Feb 2006
Location: U of M
Posts: 543
Send a message via AIM to Thor06
Re: Antifreeze in my intake?!?

Sounds like a leaky seal in the turbo.
__________________
90 TSI AWD - A long way to go....
Thor06 is offline   Reply With Quote
Old 06-22-2006   #3
snea
 

Join Date: Dec 2005
Posts: 44
Re: Antifreeze in my intake?!?

Leaky seal? I didn't think the casting, uness cracked, would allow for coolant to leak...
snea is offline   Reply With Quote
Old 06-22-2006   #4
Boostin_dreams
 

Join Date: Jan 2006
Location: SLP
Posts: 4
Send a message via AIM to Boostin_dreams
Re: Antifreeze in my intake?!?

Well what in the leakdown test showed that it would be a cracked block? Need to know what the tests you did showed and what test you did to help you out more.
Boostin_dreams is offline   Reply With Quote
Old 06-22-2006   #5
tim
..
 
tim's Avatar
 

Join Date: Oct 2005
Location: Mondovi, Wi
Posts: 1,326
Re: Antifreeze in my intake?!?

Yes, what are the results of the leakdown and where was it leaking from? Also, have you done a coolant system pressure test? If not now would be a good time.
tim is offline   Reply With Quote
Old 06-22-2006   #6
snea
 

Join Date: Dec 2005
Posts: 44
Re: Antifreeze in my intake?!?

when I did the leakdown test, I heard air coming out the coolant fill hole, and none out the oil filler hole.

When it ran, it would spew acers of white smoke, and after test driving it, there was antifreeze in the oil.
snea is offline   Reply With Quote
Old 06-22-2006   #7
snea
 

Join Date: Dec 2005
Posts: 44
Re: Antifreeze in my intake?!?

I just broke the seals on the coolant system, I was getting ready to take off my head.
snea is offline   Reply With Quote
Old 06-23-2006   #8
Shane55113
Now 20% less Racist
 
Shane55113's Avatar
 

Join Date: Mar 2006
Location: St. Paul
Posts: 408
Send a message via AIM to Shane55113
Re: Antifreeze in my intake?!?

time for a 6bolt
__________________
If I spent the same amount of $ on my car as I do on booze I'd have a 9 sec car by now!
Shane55113 is offline   Reply With Quote
Old 06-23-2006   #9
snea
 

Join Date: Dec 2005
Posts: 44
Re: Antifreeze in my intake?!?

Quote:
Originally Posted by Shane55113
time for a 6bolt
I wish guys, but I can't afford it, that's why I was going to part it out, but now I found this, I thought it may be a different problem than I expected.

Oh, and when I took the sparkplug nearest the trans out, the piston was wet, and that's the cyl. that leaked through the coolant system.
snea is offline   Reply With Quote
Old 06-23-2006   #10
Pushit2.0
15min late to the world
Re: Antifreeze in my intake?!?

So it sounds like a blown head gasket.

~John
__________________
Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.
Pushit2.0 is offline   Reply With Quote
Old 06-23-2006   #11
snea
 

Join Date: Dec 2005
Posts: 44
Re: Antifreeze in my intake?!?

So should I still try to pull the head off? I still have the intake and exhaust maifold attatched...
snea is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.