03-15-2018
|
#1
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
2g street/cruiser build
Here we go again on another build thread. This is the girlfriends build and car that I am documenting since she is not on here. Little history on the shell we picked up, originally from Michigan and is rust free with a full cage. The car itself has been sitting for who knows how long and has not been touched really untill we got ahold of it, had no interior and was basically stripped. So far here is what we have done: Stripped engine bay, sanded and resealed then painted, subframes have been sand blasted then powdercoated with solid bushings installed, all new suspension parts with almost all bolts, wheel wells undercoated with por15, full interior installed, and a ton more work. As for a mod list here it is and it will change as time goes on but as for now she is going to run this setup and see what we can do with it.
Engine :
Stock 7 bolt bottom end 97-99 balance shafts deleted
7 bolt head, evo behive springs, fp2 cams
Drivetrain :
Stage 2 bushwacker trans, welded center diff
Act sprung 6 puck clutch
Solid subframe bushings
Solid driveshaft carrier bushings
Solid diff bushings
Enkei RP01 17x8 with mt et streets
Everything else is stock
Turbo :
Big evo3 16g externally gated
2g exhaust manifold
Bnfab side exit exhaust
Tial 38mm wastegate
Bolt-ons :
Evo 3 intake manifold
1g na throttle body
Vrsf front mount
Tial bov
Small battery kit
Avid engine mounts
Fuel :
Pte 1000cc injectors
Walbro 255
Engine management:
Dsmlink v3
Speed density
There more i am missing but for being the girlfriends car this will be a perfect setup for her as she just wants a nice cruiser for nice days with occasional track days and Mexico days.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
Last edited by dsmDolney; 07-19-2018 at 10:49 PM..
|
|
|
03-15-2018
|
#2
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: Dsmdolney’s street/drag build
Nice. Should be a fun year with all the 16G cars out.
Are you planning to take a lot of weight out of the car?
|
|
|
03-15-2018
|
#3
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Quote:
Originally Posted by turbotalon1g
Nice. Should be a fun year with all the 16G cars out.
Are you planning to take a lot of weight out of the car?
|
The spare wheel well is already cut out so that shaved some weight, ac is all removed and some small other things.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
Last edited by dsmDolney; 06-24-2018 at 01:25 PM..
|
|
|
03-15-2018
|
#4
|
Join Date: Sep 2007
Location: Minnesota
Drives: DSM
Posts: 319
|
Re: Dsmdolney’s street/drag build
10s on 7 bolt rods? Man, you will ruin the day for everyone else with oil and engine leftovers all over the track. J/K, good luck with the build!
|
|
|
03-15-2018
|
#5
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Quote:
Originally Posted by Fran05
10s on 7 bolt rods? Man, you will ruin the day for everyone else with oil and engine leftovers all over the track. J/K, good luck with the build!
|
Yea we will see what i push with a stock bottom end it wont be enough to run 10s thats for sure lol. We will try to get there when i get my built short block
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
|
|
|
03-15-2018
|
#6
|
Been there, done that.
Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
|
Re: Dsmdolney’s street/drag build
Nice another Michigan car. My transporter left 40min to go get mine.
Can't wait to see the build thread progress on yours.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
|
|
|
03-16-2018
|
#7
|
Got Boost o_O'' m
Join Date: Sep 2009
Location: In a house
Drives: 1991 Eagle Talon TSI AWD Spooling Fiddy Trim Style
Posts: 1,389
|
Re: Dsmdolney’s street/drag build
16G that is interesting, i just picked up another 16G my self in anticipation of downgrading and enjoying the car more then making all this whp but wrecking transmissions every other race day. Did the car come with the components already blasted or did you do that? I believe you did...where did you get that huge frame blasted? Would be nice to get that done one of tehse days, and upgrade the bushings ect if the car dosnt sell before.
|
|
|
03-16-2018
|
#8
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
I got them blasted and powdercoated myself then installed the bushings
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
|
|
|
03-16-2018
|
#9
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: Dsmdolney’s street/drag build
LMAO whats the issue with 10s on a 7 bolt? this is 2018.
|
|
|
03-16-2018
|
#10
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Some new parts showed up today which included a na 1g throttle body, jmfab small battery tray, and new valvecover with an fitting for the catch can. All installed now to just wait for the rest of the stuff to show up
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
Last edited by dsmDolney; 06-24-2018 at 09:14 AM..
|
|
|
06-24-2018
|
#11
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Got alot of stuff done tonight to wrap this thing up. Got the fuel lines all done and everything hooked up, installed and wired in the aem gauges, installed the jay racing alternator relocation, and a bunch more misc things that needed to be done. Slowly getting there.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
Last edited by dsmDolney; 09-05-2018 at 10:54 PM..
|
|
|
06-24-2018
|
#12
|
Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
|
Re: Dsmdolney’s street/drag build
Looks good man, who did the welding on the VC for you?
It looks really close.
|
|
|
06-24-2018
|
#13
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Quote:
Originally Posted by turbotalon1g
Looks good man, who did the welding on the VC for you?
It looks really close.
|
bought the valve cover with the fittings welded on already so not exactly sure who did it.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
|
|
|
07-19-2018
|
#14
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Fenders, hood, front bumper all mounted up and still have to make a heat sheild for the side exit exhaust. Trying to make this thing ready for the cookout so we are trying to bust it out now.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
|
|
|
09-05-2018
|
#15
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Well we wrapped up the engine bay tonight, all that is left is fluids and we are ready to start it. We hope to make it to Pg with the car next weekend but it will be cutting it close.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
|
|
|
10-06-2018
|
#16
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
Some billet goodness. Dont mind the nasty clamps they will be replaced
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
|
|
|
10-10-2018
|
#17
|
Join Date: Jan 2014
Location: Blaine, Mn
Drives: Racecars
Posts: 679
|
Re: Dsmdolney’s street/drag build
The car is a rollin. Few small things that need to be addressed then we will look into getting dyno time to see what this little 16g can put down. Also in the near future I plan on swapping coilovers in instead of the kyb / megan shock and spring setup we have in it now which sits way to low for me.
__________________
Tyler
93’ Eagle talon ( current build )
2011 Subaru Sti 11.0 @135mph
Last edited by dsmDolney; 10-10-2018 at 04:12 PM..
|
|
|
10-11-2018
|
#18
|
N17r0U$ br4D
|
Re: Dsmdolney’s street/drag build
Anybody else have issues opening the attachments?
From the little thumbnails it looks really clean and well done
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
|
|
|
10-11-2018
|
#19
|
Join Date: Mar 2006
Location: Minnesota
Drives: Cars
Posts: 1,457
|
Re: Dsmdolney’s street/drag build
Quote:
Originally Posted by C3L1CA
Anybody else have issues opening the attachments?
From the little thumbnails it looks really clean and well done
|
attachments have not worked in some time it seems. Not sure what the deal is.
__________________
-Matt
'94 Eagle Talon TSI AWD
'06 Acura TL
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|