Stroker? 2.0? WTH?

tehehodi · 07-23-2009

I'm really really confused, i should of took a pic of the bottom end when i had the oil pan off, but, it looks like eagle rods and je pistons bored .020 over or 85mm i think it's what it said, with arp rod bolts. The block has oil squirters also. Anyway, looking at my cam gears, it has a oem 4g64 cam on it? the block itself says 4g63 unless i'm misreading it.

95talonracer · 07-23-2009

how does it have oem 4g64 cam gears

**scheides** · 07-23-2009

How about some pics and we'll help you decipher

**Shane@DBPerformance** · 07-23-2009

It could be a 2.3l stroker.

MustGoFaster · 07-23-2009

It's possible. The 4g64 cam gears are the same except the pin is drilled in a slightly different spot.

Mwolf83 · 07-23-2009

Maybe they are just 95-96 cam gears, sometimes people just guess that they are 4g64...sometimes. Do they look like this:

tehehodi · 07-23-2009

^^^they look like that, exactly! is it ok that it's on a 1g head? my whole motor is 1g.

4g63tcrazy · 07-23-2009

I don't see why that wouldn't be fine. Are you 100% sure that you have a 1g head?

tehehodi · 07-24-2009

1g head because it has the bigger intake ports. I would take pics, but my blackberry is dead, and i can't charge it, and a camera i got, the cord doesn't work. Also the CAS i beleive is a green top, i'm not sure, its got some surface rust on it

**Shane@DBPerformance** · 07-24-2009

Do the cam gears say D20 or D24 on them?

tehehodi · 07-27-2009

**Shane@DBPerformance** · 07-27-2009

Those are 2.0l cam gears then.

tehehodi · 07-27-2009

thanks!