Master Cylinder noise

[1slowdsm]

So my power steering belt started tearing apart just yesterday for no reason. By the time I got home, there was no power steering when I tried to turn a corner. Bought a new belt this morning and changed it out and now I find that when I step on the clutch, there's a squeaking noise coming from the master cylinder. I went upside down and tried to press the clutch in all the way (impossible for me, it's a 2600 and I'm not all that strong). But from what I could push in I can hear the a squeak coming from where the master cylinder is located. I can hear it better from the engine bay, but it's both inside and out. I dont know if the power steering belt has anything to do with it, but after I changed it, I have that weird noise. I just hope the master cylinder isnt going out...I've had more than enough problems I still have to take care of..haha.

[A//// Guy]

You'll know when the master is going out because there will be no pressure and there will be a visible leak running down the firewall on the inside of the car coming from under the boot. The squeeking is probably just a dry connection. Spray some wd40 on the spring assembly and all other moving joints you can see under there as you move the clutch pedal.

[1slowdsm]

Okay, nvm. The squeaking noise went away....somehow. If nothing is going to break down AGAIN, then I'm okay with not trying to figure out what made the noise...

[MATCHBX]

I can't believe I'm going to say this, but, Peter is probably right. Sounds like it's a dry joint somewhere in the pedal assembly. Mine does that from time to time.

[A//// Guy]

Am I usually wrong?

[MATCHBX]

Of course.

[A//// Guy]

(I dont know if your kidding or being serious) lol.