Finally getting stuff done on our cars

[Swifty1638]

I honestly wouldn't be suprised to see 8xx on 35-36 psi.

-A. Swift

[niterydr]

Originally Posted by Swifty1638

I honestly wouldn't be suprised to see 8xx on 35-36 psi.

-A. Swift

What world do you live in? Do they have gravity there?

[niterydr]

481awhp, no corrections. First clean pull to redline (9300rpm). I've only attempted 8 pulls on it so far, had to get that afr dialed in. The motor is alot tighter for fuel consumption compared to my original estimate.
Those 1600's with that A1000 pump is massive.

We will see what I can get out of it this afternoon, get those AFR's in check, maybe toss some timing at it, bump the boost a bit if we feel like it.
No point in pushing it as the car will be sub 2900lbs w/driver.

[Swifty1638]

I'm living in the make-believe world were swanny drive's his car, rather then let's it sit there, and everyone doesn't pick on swifty because his car isn't tuned, or run at the track for the last 2 years!

-A. Swift

[niterydr]

Originally Posted by Swifty1638

I'm living in the make-believe world were swanny drive's his car, rather then let's it sit there, and everyone doesn't pick on swifty because his car isn't tuned, or run at the track for the last 2 years!

-A. Swift

That world doesn't exist. My car is simply a figment of your imagination.

But if you are bored, you can come out to my world tonight and get owned in Guitar hero/do some drinking, lol.

[Swifty1638]

tempting...really tempting. you guys going up to the shop later today to do some more stuff? I may be tempted to come up there with a digi-cam I plan on buying later to take quality photos of shit.

-A. Swift

[niterydr]

Originally Posted by Swifty1638

tempting...really tempting. you guys going up to the shop later today to do some more stuff? I may be tempted to come up there with a digi-cam I plan on buying later to take quality photos of shit.

-A. Swift

Yeah I'll be here until probably 10. I have John's car here, another one to tune that should make good power as well.

[Swifty1638]

i'll talk to my lady-friend and see what's up. what time you thinking this will all go down? PM if you want it private..

-A. Swift

[Shane@DBPerformance]

Do you realize that 800awhp on that dyno is like 960+ AWHP on a Dynojet. And those Evos that are making 1000awhp on Dynojets are pushing 50+psi.

Originally Posted by Swifty1638

I honestly wouldn't be suprised to see 8xx on 35-36 psi.

-A. Swift

[MustGoFaster]

Originally Posted by ecoli

Do you realize that 800awhp on that dyno is like 960+ AWHP on a Dynojet. And those Evos that are making 1000awhp on Dynojets are pushing 50+psi.

Obviously not. On a plus not John's turbo spools faster than swifty's.

[Swifty1638]

actually smartass, it doesn't. his is 600 rpm laggier.

Yea, I was living in la-la land. Whatever.

-A. Swift

[FattyBoomBatty]

This is funny, but I feel left out because my screenname isn't green. At least I was the eonly one on the low side.

[niterydr]

Originally Posted by Swifty1638

actually smartass, it doesn't. his is 600 rpm laggier.

Yea, I was living in la-la land. Whatever.

-A. Swift

Full boost at 6600rpm, currently, I'll see if I can speed that spool up a bit.

[Shane@DBPerformance]

Nitrous works wonders.

Originally Posted by niterydr

Full boost at 6600rpm, currently, I'll see if I can speed that spool up a bit.

[Pushit2.0]

NOS will be next year, also VP import and a lot more boost will make the shep stg 4 tranny a gear salad.

~John

[niterydr]

Originally Posted by ecoli

Nitrous works wonders.

Naw it weighs to much, the tune is still a bit rough.
I can probably get another 100rpm out of it, but the nitrous weighs to much for john currently.

I think hes building an awd fucking honda.

[Swifty1638]

I too have a direct port setup sitting here right now. I will be taking off the turbo along with everything else this winter, and inspecting it, as there's no reason it should be that laggy.

-A. Swift

[JET]

Originally Posted by FattyBoomBatty

This is funny, but I feel left out because my screenname isn't green.

Yay green! Nice numbers for only 23 psi!

[Pushit2.0]

26psi, I do not have enough exhaust manifold pressure to get it down to 23psi.

~John

[Matt D.]

Originally Posted by FattyBoomBatty

This is funny, but I feel left out because my screenname isn't green.

My name isn't green either.