Spyder in the making

[turbotalon1g]

Originally Posted by CornFed2.4

I just gave away 5 or so in the last month of oem ones. Lol.

Send that shit this way!

Originally Posted by b00sted_spyder

I've got tons of new oem parts into it from nuts, bolts, clips, plates, gaskets, etc. That's just how I roll. Lol.

That is gross.

[b00sted_spyder]

This morning I went to go visit her. Plugged in coil pack. Primed up the engine. Tried starting it and couldn't get it started. Checked the plugs and #4 wasnt getting any fuel. The fic 1150 had some white residue on it. Im assuming from e85 sitting for a year and half. Swapped back in my 1680cc injectors. Dialed the 1680cc injectors on link and tried starting it. She starts for a few seconds and just dies. I captured a stream and looks like the injector duty just drops straight to 0 when it dies. Im assuming im having a fuel problem now?

[turbotalon1g]

Sounds like it to me. how is your Fuel Pressure?

[C3L1CA]

Engine bay looks good! I've never seen such a clean coil pack!

[b00sted_spyder]

Originally Posted by turbotalon1g

Sounds like it to me. how is your Fuel Pressure?

Fuel pressure, I do not know. It still has the factory 2g regulator and should be at 43.5 psi. Is there a way to check for fuel pressure on the stock unit?