MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-22-2005   #1
rk4g63
Burp!
 

Join Date: Sep 2005
Location: Blaine
Posts: 2
Send a message via Yahoo to rk4g63
Upgrades to my car - everyone please let me know your opinions

I have a 94 Talon Tsi AWD, 132k. New timing belt setup at 90k, new act 2100 at 90k.
Equipment:
Stock 7 bolt/4 bolt,Tranny and t-case replaced and oil changed a week ago. Big 16g (at 90k), Evo 3 manifold, Supra TT SMIC, 2.5" non-SS exh with a few bends, MBC

Intentions for the car:
Make it a street car and a solid 12 sec car on the track. Mostly a highly reliable street car, with rare occasions on the track. I don't drag race, just street race. Need to give high gas mileage as well.

Question 1 - What's the max boost level thats safe to run on my setup currently?
Question 2- Whats the max boost that my stock BOV can take?


Upgrades suggested by JET (he's been a big help) and I'm following those closely (keep in mind I'm trying to keep it cheap for now):
650 cc inj
SAFC 2
electronic Boost controller (I wanted this)
2g maf
greddy egt gauge and greddy/TRE probe
datalogger to check knock and O2 volts - I already have a P3 laptop.
190 pump


Question 3: What is the max boost that I should run with the projected setup? I will never run more than 22 psi anyway. I mean to stay REALLLY safe on the boost though, so I need to know when I am pushing the limits of the projected setup.
Question4 : What boost level should I run on the street to get best gas mileage?
Question 5: I'm trying to avoids fuel cut, which is why I'm going for bigger injectors, afc2, etc. Can I get away using just 550 cc? I'm asking coz I'm getting them for 100$ shipped.
Question 6: Trying to use a walbro 190 coz I dont want to get an afpr. Can I also use a low pressure 255 and still not have to use an afpr? Jet, let me know - I forgot to ask you this. I think I asked you only about the high pres 255.

I'd like everyone's opinions so I don't start off wrong and fuck it all up. Main goal is to stay on the safe side, make it reliable and still get a 12 sec car. If I end up being late 12's in the interests of safety of my powertrain/drivetrain, even though I might get to early 12's if I push it, so be it. Just as an example.

Thnaks for the help, guys.

Last edited by rk4g63; 09-22-2005 at 11:03 PM..
rk4g63 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:37 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.