2g with 50trim intercooler plumbing help needed

[Onefast99gsx]

Ok, i need some help here in knowing how/where to route the pipes from the turbo to the intercooler.

Car- 2g GSX
Turbo- PTE 50trim t04e housing outlet facing straight down (no elbow)

I was just gonna use a good poly-rubber 90* elbow.

My intercooler inlet is on the bottom right(passenger) side just under the fog light. How do i plumb to the intercooler inlet. I kinda semi-fitted things last night with the stock rad. fan and man it looks tighter than bitch. I don't see how to even begin to plumb this. How do you guys run yours. Do i run straight down from the turbo, then to 90* and go under the crossmember, which would not leave much clearance from the pipe to the ground.

Any help would be appreciated. I need to order some mandrel pipe and couplers possibly by tommorow.

Thanks.