|
Re: Wheel spin developed recently in all gears except 5th
Quote:
|
Originally Posted by Jakey
Correct me if I'm wrong JET but aren't there (2) 13mm bolts which hold the valve on? The rubber cap can be popped off my a small screwdriver.
|
That was the 90's, the later ones you just take the rubber cap off, push in the retaining pin and use a 2.5mm allen wrench to unscrew the valve. You need to make sure the tranny is in reverse and the clutch is pushed in. I put a 2x4 between the clutch pedal and the seat to hold the clutch down.
__________________
Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
|
Threaded Mode