Quote:
|
Originally Posted by niterydr
For those that care:
Cylinder #3 doesn't like me anymore. Last night we made 519awhp at 22psi, very safe tune. Then we decided to turn it up a bit. It made 526 at 24-25psi...the car seemed to just go "flat" after spool-up. Safe a/f ratios, no knock, low timing (16 degrees advance), a very safe and monitered tune, almost like you'd see with doctors watching someone in the ICU wing of a hosptial.
|
16 degrees of timing advance on pump gas and 24-25lbs of boost is nowhere near "low timing" unless you are running a really low compression ratio (in the 7.5:1 range). Don't you guys think timing should have been set in the single digits when running that much boost on pump gas? I could see maybe 11-12 degress but 16 degrees just seems pretty aggressive to me for not using C16 at that boost level.
Threaded Mode