Safc

[Tman1gtsi]

currently I am running a 16g turbo, walbro fuel pump (will be putting on 660's with the safc), 2g exhaust manifold, greddy type s, apex'i catback exhaust, and a recent dejon hard intake with 2g mas, which I hooked up, and the car runs, and drives, but wont run very well, idk if those old hoses need plugs to stop air etc, and about the plugs, how can i splice into wires if the plugs are there, do I take them off, idk sorry bout all the posts, I got this things stock, and the last thing I wanna do is this is gauges which I already have, electrical isnt my thing, thanks

[tpunx99GSX]

strip the wire using a knife and just cut the insulation around the wire, dont cut the wire unless it tells you to in the VFAQ.

[Swifty1638]

hey, after talking with tony at hand command (wiring guru) I've come to like the connectors. Those plastic butt-connecters, or whatever they are called. It looks cleaner then a hacked up wire, that's full of solder, and wrapped in E. tape. Plus, with the plastic connector (kinda t's off the wire) it is more flexible then the hard solder.

-A. Swift