Compressor Surge

[iceminion]

Yeah, the 1.8 is awesome, i really want to do the 1.6 DOCH swap into something, same bore, really short stroke, like 80mm or something. good for 10,000+ rpms

The feed line is completely stock.....where would one begin to troubleshoot?

Would you recommend using the oil feed line from the housing for this?

My SC61 is fed from the oil filter housing....I spose if my thrust bearing goes out on my SC61 then we can rule out oil feed issues. (yes, I have a full 5 qts of oil in there)

[scheides]

Originally Posted by iceminion

The feed line is completely stock.....where would one begin to troubleshoot?

Check your feed line for blockage, make sure it flows fluid easily.

For that matter, check your turbo drain tube, perhaps its filled with RTV?