4seasons69, poor

[4seasons69]

ok so I was out there for at least 45min messing around with his car. (I've done this many times on my car and usaually only takes a couple minutes) to find out that he messed up the threads on the master rod. so I tell him I can probably try to come back with a tap and die set and see if we can get the threads cleaned up good enough to screw it in if that doesn't work your gona need to replace it.

long story short one of the guys at my work just had a baby a few weeks ago and was out and then last saturday the day techs wife died. so i've been working extremely long hours and haven't had time to do anything but work. I sent him a couple texts filling him in on what was going on but never heard back from him.

I did what I could with his car but I said i'd do the clutch rod and adjustment cause they are quick. I never told him I would put in a master cylinder for 30 bucks

you wouldn't bring your car into a shop to have it diagnosed and expect them to do it for free unless your crazy that's not how it works. i'm a mechanic and time is money and my time isn't free. but since he's so butt hurt over 30 bucks i'll give him his money back

[4seasons69]

oh and I had offerd to let him borrow my tap and die set since it had been a while and still wasn't able to make it back out there with no reply as well.

and there was NO money exchanged he never gave me 30 bucks. I owed him some money for an engine I bought from him and knocked 30 bucks off of what I owed him. I was told it was a 6 bolt with an evo3 head with port work. after some research and more inspection it was definitely a 1g head with no signs of port work so who knows if it actually had as low of miles as he was claiming. I let it go and didn't run a muck because it was a used part and people lie all the time when they sell used stuff.