MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-16-2010   #4
Jungy
 
Jungy's Avatar
 

Join Date: Dec 2006
Location: SLP
Drives: 10' Sierra Denali & 99' beatervette
Posts: 252
Re: Wanted to borrow CAS (Saint Cloud)

Well I drove down to Rogers last night and borrowed Pat's (tehehodi) CAS to see if that was the cause of my hesitation. No change ... so I narrowed it down to be a fuel injector issue now and went down the line unplugging injectors one by one while idling and everyone i'd unplug would make the car stumble until I got to the last one and there was no change. I ohm'ed all the injectors out and all tested 5 ohms (Bosch 1600's), I don't suspect it to be injectors because they are new, now I am going to see if I'm getting any signal at the injector from the ecu.

Edit: No dice went out and tested it I'm getting about 3v at every injector connector at idle. I do hear a slight change in idle when I disconnect the #4 injector but not as much as the rest. Dead/clogged injector?
__________________

Last edited by Jungy; 09-16-2010 at 10:02 AM..
Jungy is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.