|
Re: evap canister
Remove everything EGR related, lines and solenoids, put a block off plate over the EGR port and let er' buck. You'll have to cap the lines by the gas tank and on the intake manifold and put a breather filter in place of the PCV valve. Follow the vac diagram
if you want the check engine light to go away you'll have to get a scanner to disable the EGR system so the computer ecu doesn't even look for it on start-up
I believe your engine will run cooler with EGR deleted and what not and you'll need 1 degree cooler plugs too, but this is if you delete the entire system.
But yea, vfaq.com fuckin' rocks. Check it out.
__________________
Need computer help? PM me if you need repair/virus problems/system building/etc, virtually anything.
"...when u lube up the pistons ur supposed to get higher compression then when they are dry..."
Last edited by NOT THE BLUE LAMPSHADE; 10-02-2010 at 02:11 AM..
|
Threaded Mode