Project Stallion

[D_Venable]

FYI, SHPs don't stick out much more, not anywhere close to needing the fenders rolled (my 88 is an SHP car). With the SHPs, the fronts will only be ~1/2" further out, while the back is only ~3mm further out (less than 1/8")

But for spacers, anything less than a 20mm spacer out back, and less than a 25 up front will require trimming the length of the wheel studs to get the wheels to seat completely (for bolt-on spacer/adapters). The "pockets" in the back of our stock wheels are not very deep.

-Derek