my new project

[4seasons69]

I

Originally Posted by URV8SUX

Holy fuck you do know there 67mm that flow more and cost a lot less?

Yes I do but the car already had a gt4294 on it so something like fp's jb hta4294 (which is a billet 67mm 4294) will bolt right up and work with my intake and exhaust. If I go with something like a pte jb cea6766 sure it's cheaper at around 1100 bucks but then I will have to have a new intake and exhaust made so in the end it will still probably be around 1500

[4seasons69]

I put some new strainers on the pumps and got the sending unit installed and rewired the relay to day. I just need some eyelets so I can finish the grounds for the pumps. It's all cleaned up now. Unfortunately I forgot to take before pictures

[URV8SUX]

Originally Posted by 4seasons69

I

Yes I do but the car already had a gt4294 on it so something like fp's jb hta4294 (which is a billet 67mm 4294) will bolt right up and work with my intake and exhaust. If I go with something like a pte jb cea6766 sure it's cheaper at around 1100 bucks but then I will have to have a new intake and exhaust made so in the end it will still probably be around 1500

I was not talking about the pte 6766 but it does flow more.

If you want something that bolts right up have you thought about sending your turbo to pte and getting the 72mm billet wheel put on it?

[4seasons69]

Originally Posted by URV8SUX

I was not talking about the pte 6766 but it does flow more.

If you want something that bolts right up have you thought about sending your turbo to pte and getting the 72mm billet wheel put on it?

I was just using that as an example. As for the 72mm billet wheel I have not thought about that. The problem with my turbo is the exhaust wheel is chewed up and that wheel alone is like $500 so with what it will cost too fix mine I would rather explore possible better choices. I've been trying to find as many options as I can so I've you have any suggestions I would love to hear them.

[4seasons69]

Here's a little update. I was finally able to order the new clutch disks and am having the cams degreed this weekend or sometime next week. So i will finally be able to install this engine in the car. I'm getting excited lol

[4seasons69]

Okay here's another mini update. Friday I brought the engine out to John (pushit2.0) and he degreed my cams in. He was also kind enough to stay up extra late and get it done Friday. A huge thanks to him! Once my clutch disks show up the engine is going back in. Hopefully next weekend.

[4seasons69]

The clutch disks came in earlier this week so after work tonight its time to start putting the the engine back in finally. Now my work just needs to hurry up and get me my w2 so I can get my taxes done and buy a new turbo lol