Mark's Evo IX MR Winter Projects

[scheides]

Woohoo! Keep us updated man!

[turbotalon1g]

I can't wait to see this in action.

[Mark Leasure]

This afternoon I milled up a fixture for my upcoming manifold fabrication project. I’m doing a top mount v-band manifold for a BB 6266. It bolts down the head flange to reduce warping when I finish weld everything together. I also included a port on each runner for back purging. I also built a jig to cut SS pipes at precise angles to fabricate a v-band merge collector.

[daneatsv8s]

Nice work Mark.

[Pushit2.0]

http://www.solarflux.com/Pages/Productinfo.html

For SS welding I used this, its a powder you mix with methanol and put on the back side of each weld with a little brush. You mix it to a not to think, not to thin paste and after your parts are all mocked up I mark and break it all down to put the flux in.

It leaves a black glassy backing where the weld is, then wash out your pipes when you are done. Looking good, this should move out when your done.

[Mark Leasure]

Quick update: I fab’d up my merge collector this weekend. I’m still waiting on the v-band to finish it up. I plan on assembling my engine next week. I’m still waiting for the transfer case to come back from jacks before I can get the engine back in the car. I have a couple of weeks off at the end of the month and I plan on wrapping up the motor/trans/t case installation, with a stretch goal of finishing my manifold fabrication then too!!
I bought one of those gas saver lenses and another argon regulator for back purging. I haven’t welded much stainless in the past so for a first try I think it turned out awesome.

[scheides]

Not bad for a newb! :P

Very nice man.

[TalonFiero]

Nice work Mark!

I'll have to find time to make my way over to your place and check out the work first hand.

I need some motivation!

[At-Least-It's-An-Evo]

Originally Posted by TalonFiero

Nice work Mark!

I'll have to find time to make my way over to your place and check out the work first hand.

I need some motivation!

Very nice! Jim, pick me up on the way, i wanna see this cool shiat too

[Mark Leasure]

Originally Posted by TalonFiero

Nice work Mark!

I'll have to find time to make my way over to your place and check out the work first hand.

I need some motivation!

Just tell me when you want to stop over!

[Goat Blower]

Originally Posted by TalonFiero

Nice work Mark!

I'll have to find time to make my way over to your place and check out the work first hand.

I need some motivation!

Damn, I think I missed the northern train here. I need some motivation as well, when are we all heading down to Eagan?

[turbotalon1g]

I'd like to take seat no. 3

[Mark Leasure]

I welded the v-band flange to the merge collector last night. V-bands are awesome; they align the turbo to the collector perfectly. I rough ported the collector, still needs refining.

[FattyBoomBatty]

Me like.

[turbotalon1g]

Inspiring, maybe i should quit watching cartoons and practice welding. (not that I can weld anywhere near as good as you)

[Mark Leasure]

Good progress today, assembled the 2.3 motor today. MAP built up my head too, with Kiggley springs and retainers, new MAP SS valves with bronze guides. This thing is going to be fun!

[Mark Leasure]

Just finished cleaning up the merge collector.




Then I modified the crank scraper & windage tray due to the stroked motor.

[turbotalon1g]

What did you use to clean up the merge collector?

Do those motors come stock with a scraper and windage tray?

[Mark Leasure]

A die grinder with a flapper wheel. I got the wheels at Northern Tools, 2.50 each. The scraper and windage tray come with the AMS oil pan kit.

[turbotalon1g]

Originally Posted by Mark Leasure

A die grinder with a flapper wheel. I got the wheels at Northern Tools, 2.50 each. The scraper and windage tray come with the AMS oil pan kit.

Thanks, I'm trying trying to learn the ways and I appreciate it.