08-12-2004
|
#1
|
|
Asshat King
Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
|
With the Eagle rods, did the ends require any resizing before use?
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP
Proud to be a Cyclone
Check it out: Racers Against Street Racing |
|
|
|
08-12-2004
|
#2
|
|
back in the saddle again
|
Since we were capping at 46lbs a min, and chris talked to a dsmlink guy that looked at his log and 'estimated' at 51lbs/min I would venture a guess of 450-475awhp right now.
And the problem was the wires, not the plugs.
When he gets back, he'll throw in a maf-t and up it to 35psi or so on elites dyno.
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
|
08-12-2004
|
#3
|
|
Been there, done that.
Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
|
I was reading that also on dsmlink forums. (I'm the one that asked the question)
51lbs/min is impressive considering:
1G head
1G Cams
1G Intake Manifold
I'm seeing 52lbs/min on pump gas with my car. But I'm reving to 8,000rpms how high is Chris Reving his car to? and it's creeps from 22psi at 7200rpms up to 25psi when I hit 8,000rpms.
On Race Gas at 25psi - I was seeing 54lbs/min for my 456.7whp?
And I'm running HKS 264/272s, and Magnus SMI.
So gets some damn cams, and a sheet metal in that thing and let see some 57lbs/min
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
|
|
|
|
|
08-12-2004
|
#4
|
|
back in the saddle again
|
I dunno, it was an estimate via my butt after riding in johns car. We are only running 25.3psi peak, its averaging around 23psi I would say. Spool-up is insanly fast and he is reving to 7500rpm right now. Once he does some head work/sheetmetal/cams this winter, it should really scoot!
On the dyno we were hitting 36lbs a minute or so. It would get to 42, then fall back, then go back to 40 and make peak power. I'll see if I can get some dyno graphs posted sometime soon. The car was missing the entire time, and still made good power.
I wish we would of swapped plug wires at the dyno, would of saved time last night, but things always work out for the best. If the car would of been 'tuned' not last night, drain plug would of probably fell out somewhere in Wisconsin and he would of been SOL. Sometimes things happen for reasons..
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
|
08-12-2004
|
#5
|
Join Date: Aug 2003
Location: Blaine
Posts: 2,789
|
so true..
congrats...
and btw, Chris, you called? sorry i missed your call. whats up?
_E
__________________
|
|
|
|
|
08-12-2004
|
#6
|
|
Shit Rocket Pilot
Join Date: Oct 2003
Location: Shoreview, MN
Drives: 2003 Evolution VIII
Posts: 7,752
|
Quote:
Originally posted by Enes@Aug 12 2004, 01:11 PM
and btw, Chris, you called? sorry i missed your call. whats up?
|
Probably thought he needed a tow... LOL
__________________
"If everything seems under control, you're just not going fast enough." -Mario Andretti
03 Mitsubishi Lancer Evolution VIII
Quote:
Originally Posted by Tachyon
Every minute you spend in your Evo, not in boost, is a minute of your life you'll never get back.
|
|
|
|
|
|
08-12-2004
|
#7
|
|
Been there, done that.
Join Date: Oct 2003
Location: Camden, S.C.
Posts: 3,248
|
I don't know about his car.
But we are basically running the same turbo but he has a .82 a/r
And I know the difference in Airflow from 7500 - 8,000 is big.
At about 7500rpms - most of the time I'm only at about 45lbs/min
At 8,000rpms I'm at about 52lbs/min
So all I got to say is DAMN - maybe he will hit 60lbs/min with Cams, And SMI.
__________________
1997 GSX - new ride
1997 GSX - dedicated track car
2004 R6 - sold
1992 GSX - sold
1996 GST - sold
1995 GSX - sold
Best 1/4 - 11.7 on 93oct
Best 1/4 MPH - 120mph
|
|
|
|
|
08-12-2004
|
#8
|
Join Date: Aug 2003
Location: Blaine
Posts: 2,789
|
it must be something about that 7th bolt thing that is causing the problems with the transfer case!
-E
__________________
|
|
|
|
|
08-12-2004
|
#9
|
|
back in the saddle again
|
Quote:
Originally posted by Enes@Aug 12 2004, 02:12 PM
it must be something about that 7th bolt thing that is causing the problems with the transfer case!
-E
|
its all in the QPR Inc 2.4  .
__________________
My street car runs low 11's and my race car's personal best is a mid 11....
|
|
|
|
|
08-12-2004
|
#10
|
|
ConArtist
Join Date: Oct 2003
Posts: 1,960
|
[EVILMENIACLEVOICE]No one will ever know because it's top secret  I do my work early in the morning when all you girls are asleep for just that reason Muhahahaha.[/EVILMENICLEVOICE]
__________________
Quick Precision Racing, Inc.
"Always Raising the Bar!"
651-488-7774
|
|
|
|
|
08-12-2004
|
#11
|
|
Asshat King
Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
|
Quote:
Originally posted by Jakey@Aug 12 2004, 01:34 PM
With the Eagle rods, did the ends require any resizing before use?
|
*Cough Cough*
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP
Proud to be a Cyclone
Check it out: Racers Against Street Racing |
|
|
|
|
08-12-2004
|
#12
|
|
Area code 166 represent
Join Date: Aug 2003
Location: Crystal, MN
Posts: 10,329
|
to the pistons? no, not in Chris's case. 1G rods to 2G pistons or 1G rods to Wiesco's are in need of some machining/bushing.
__________________
'16 Focus ST - Daily Duty
'93 mr2 - Track car in progress
|
|
|
|
|
08-12-2004
|
#13
|
|
ConArtist
Join Date: Oct 2003
Posts: 1,960
|
Ross pistons also can require pin fitting to the rod on the small end. Wisecos are usually dead on.
__________________
Quick Precision Racing, Inc.
"Always Raising the Bar!"
651-488-7774
|
|
|
|
|
08-12-2004
|
#14
|
|
Asshat King
Join Date: Oct 2003
Location: Decorah / Ames, Iowa
Posts: 3,683
|
I'm referring to the build quality of the Eagle rods. There have been people who have run into trouble with the Eagle 4G63 rods having imperfections which required possibly resizing them, as in the journals not being in spec from the factory.
__________________
DSMSTYLE MAFIA - Holdin' Down the Cornfields of IA
'92 Laser RS AWD & '01 Grand Prix GTP
Proud to be a Cyclone
Check it out: Racers Against Street Racing |
|
|
|
|
08-12-2004
|
#15
|
Join Date: Mar 2004
Posts: 291
|
Quote:
Originally posted by Jakey@Aug 12 2004, 08:48 PM
I'm referring to the build quality of the Eagle rods. There have been people who have run into trouble with the Eagle 4G63 rods having imperfections which required possibly resizing them, as in the journals not being in spec from the factory.
|
no prob with mine
__________________
DSM + FWD = Carl Lewis in high heels
DSM + FWD + slicks = Michael Johnson in birkenstocks
|
|
|
|
|
08-12-2004
|
#16
|
Join Date: Oct 2003
Location: Cottage Grove, MN
Posts: 2,120
|
Nope no problems with the rods, and Mike checked everything over himself 7 or so times to make sure lol!
Yeah with the MAS pinned I am not sure about actual airflow, basically the ECU is guessing at this point based on VE tables...Also revving the 8000 at this point is doable, but probably wouldn't yield much of a gain due to stock head/cams/intake manifold...
We'll stick with 7500 and 25 psi for the SO, once I get back we'll see whats up
Chris
__________________
Chris Carey, President
Modern Automotive Performance
P: 763-545-3800
E: chris@maperformance.com
We want your business! Please contact me directly for a quote or stop by the facility for a quick tour!
|
|
|
|
|
08-13-2004
|
#17
|
|
moonshine power
|
Chris, looks like you are heading in the right direction. Nice job on the 7bolt, hope you do well at the SO.
Does everybody have 400+ HP cars now? :bounce:
Jim
|
|
|
|
|
08-13-2004
|
#18
|
|
Area code 166 represent
Join Date: Aug 2003
Location: Crystal, MN
Posts: 10,329
|
no, yours hasn't started yet. lol
__________________
'16 Focus ST - Daily Duty
'93 mr2 - Track car in progress
|
|
|
|
|
08-14-2004
|
#19
|
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
I believe Chris has a larger turbo than you Brian if I can remember right. You have a gt35 right?
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
|
|
08-14-2004
|
#20
|
|
Shit Rocket Pilot
Join Date: Oct 2003
Location: Shoreview, MN
Drives: 2003 Evolution VIII
Posts: 7,752
|
Quote:
Originally posted by TalonFiero@Aug 13 2004, 03:41 PM
Does everybody have 400+ HP cars now?
|
400hp out of a 16g? I can sure as hell try! :woowoo:
__________________
"If everything seems under control, you're just not going fast enough." -Mario Andretti
03 Mitsubishi Lancer Evolution VIII
Quote:
Originally Posted by Tachyon
Every minute you spend in your Evo, not in boost, is a minute of your life you'll never get back.
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
