my new project - Page 26

turbotalon1g · 07-06-2013

You should of brought it out last night. We had a good match for you. 6.0 & 76mm at 10lbs.

**4seasons69** · 07-06-2013

Quote:

Originally Posted by turbotalon1g 1g

You should of brought it out last night. We had a good match for you. 6.0 & 76mm at 10lbs.

Still no tune, no laptop, plus the last time it was on the dyno it had e70 in it ;-). Fun shall be had after the 16th if all goes well!

I ended up having to help me buddy move since he's nice enough to store my car for me for free

turbotalon1g · 07-06-2013

I had power inverter and laptop.
It's all good that's only 2 weeks away.

**4seasons69** · 07-06-2013

Then fail on my part lol

evotuner · 07-07-2013

Good luck on the 16th man!! I hope the car treats you good this round

**4seasons69** · 07-07-2013

Quote:

Originally Posted by evotuner

Good luck on the 16th man!! I hope the car treats you good this round

Thanks! I need all the luck I can get!

**4seasons69** · 07-12-2013

So i drove the car to work yesterday. All seems to be good. There still seemed to be an exhaust leak on my way home so when I got there I was able to tighten up the vband quite a bit so hopefully that takes care of it.

Also the only other issue is that my oil pressure is really high. It's been just about pegged at 100psi cruising at 3k rpms. On my way home it was down around 75psi at 3500rpms so that's a good sign not sure if the oil pumps need to be broken in or what not. I have almost 200 miles on it since getting it running again.

So plans for this weekend are to port the oil relief valve in the ofh and switch to a good 40wt oil vs the 50wt I have in it now. Then check everything over to make sure it's ready for the dyno next Tuesday.

turbotalon1g · 07-12-2013

Sounds good, hurry up and port that housing!

**4seasons69** · 07-12-2013

Quote:

Originally Posted by turbotalon1g

Sounds good, hurry up and port that housing!

Will be doing that this Sunday

**CornFed2.4** · 07-12-2013

What time is dyno?

**4seasons69** · 07-12-2013

It's at 6pm

C3L1CA · 07-12-2013

haha if you want I can try coming up and bring the go pro again!

**4seasons69** · 07-12-2013

Haha. If you don't have anything better to do that's fine with me

**CornFed2.4** · 07-13-2013

Ill try and make it.

**4seasons69** · 07-13-2013

Awesome! Just let me know

**4seasons69** · 07-15-2013

I ported the pressure relief valve in my ofh and it seems to be a success cold start oil pressure was 50-60 psi compared to pegging the gauge at 100psi before. Just gotta finish putting it back together and drive it and see how it is when it's warmed up

**4seasons69** · 07-15-2013

So the oil pressure situation is in check. It used to pegging the gauge at 100psi at 3500rpms. Now I'm seeing 75psi at 5k rpms. I snugged up the bolts on the front case some and made sure all the fittings in my ofh were tight But there is still an oil leak. I think the front case will have to come off to fix it :-\. Nothing I can do about it now. I just have to drain the fuel fill it up with fresh e85 and swap to the 40wt oil I have then she's ready for the dyno tomorrow

turbotalon1g · 07-15-2013

Dang i forgot about this. Good luck tomorrow be positive and when in doubt

MOAR BOOST!!

**Tachyon** · 07-15-2013

Shawn. I am very very drunk right now but please win at the dyno!

carltalon · 07-15-2013

Good luck on the Dyno. What time is it going to be on? I drive past DB evey day on my way home from work. I wouldn't mind stoping in and watching a few pulls.