My Talon - Page 22

slo6oh · 09-25-2009

sell it!!! its time for something new, and even if you paint it you will still want to sell it. Turbo 6.0 or 5.3 ftw!

sleepydsm · 09-25-2009

Well this is kinda old news now, I'm on my THIRD brand new Holset. It's already on the car. About 2 weeks ago, the turbine shaft sheared right in half = gay.

The car is fixed 100% but I'm putting the finishing touches on my bumper cover with a friend's help.

Still for sale

slo6oh · 09-26-2009

Quote:

Originally Posted by sleepydsm

Well this is kinda old news now, I'm on my THIRD brand new Holset. It's already on the car. About 2 weeks ago, the turbine shaft sheared right in half = gay.

The car is fixed 100% but I'm putting the finishing touches on my bumper cover with a friend's help.

Still for sale

Yeah I know im helping you with it, and no I dont want the car back lol

**scheides** · 09-27-2009

Quote:

Originally Posted by sleepydsm

Well this is kinda old news now, I'm on my THIRD brand new Holset. It's already on the car. About 2 weeks ago, the turbine shaft sheared right in half = gay.

The car is fixed 100% but I'm putting the finishing touches on my bumper cover with a friend's help.

Still for sale

Geez, bad luck with turbos...bring this beast to the dyno day!

sleepydsm · 09-27-2009

Ok, so $7250 with small dent in hood. Or $7750 with a carbon fiber one!

Constant_Project21 · 09-27-2009

I'm planning on winning the lottery here pretty soon, I'll come get it after that lol

Swifty1638 · 09-27-2009

geez! Now I don't feel so bad about my turbo lol..

sleepydsm · 10-02-2009

Yeah, I'll probably go to something different over winter/spring, but we'll see. It's just too bad, b/c that turbo is awesome, and it's only just getting warmed up at 29psi.

sleepydsm · 01-02-2010

So as some remember my tranny blew up. I paid like $50 for a piece of shit tranny and drove it into storage. I will be getting a shep rebuild AGAIN and will most likely be putting the car up for sale in the spring lol.

C3L1CA · 01-02-2010

That sucks to go through all that hard work to have that tranny issue happen. Good luck with getting that shep rebuild and good luck selling it. I can't believe it never sold, thing is beyond clean!

sleepydsm · 01-12-2010

I might just have twin walbros, bulkhead fittings out of sender to a y block, -8 to rail.

I can't find 1/2" hardline anywhere. wtf?

Swifty1638 · 01-12-2010

twin 255's or 310's?

Hardline shit I got from jegs or summit. With the fittings. It's aluminum.

turbotalon1g · 01-12-2010

You dont need to upgrade the line, plenty have made more power on E85 without changing the lines.

Constant_Project21 · 01-12-2010

Are you doing anything different turbo wise this year? I recall at the dyno day, you mentioning something about changing it up a bit.

**goodhart** · 01-12-2010

Hey Kevin, what do you think is causing the turbo to keep going to poop?

sleepydsm · 01-13-2010

Quote:

Originally Posted by goodhart

Hey Kevin, what do you think is causing the turbo to keep going to poop?

I don't know. Lots of people on tuners have a theory of too small of oil drain, but I think that is bs. It's -10an. thats 5/8". And it's not from lack of oil, no signs when disected.

I might just have to get goat blowers 3575. But then I'd need a new 02 housing, change my IC pipe, intake, etc.

I will do some investigating. I'm getting a -4 inline with an 1/8npt fitting for an oil pressure gauge. I will also just make a much larger drain with like copper pipe or something.

**goodhart** · 01-13-2010

Quote:

Originally Posted by sleepydsm

I'm getting a -4 inline with an 1/8npt fitting for an oil pressure gauge. I will also just make a much larger drain with like copper pipe or something.

Let me know what kind of fitting you end up getting, I want to run an oil pressure sender off the feed of my new turbo also. I am feeding off the head, but I still want to be able to know what it is.

At-Least-It's-An-Evo · 01-14-2010

Quote:

Originally Posted by sleepydsm

I don't know. Lots of people on tuners have a theory of too small of oil drain, but I think that is bs. It's -10an. thats 5/8". And it's not from lack of oil, no signs when disected.

I might just have to get goat blowers 3575. But then I'd need a new 02 housing, change my IC pipe, intake, etc.

I will do some investigating. I'm getting a -4 inline with an 1/8npt fitting for an oil pressure gauge. I will also just make a much larger drain with like copper pipe or something.

Just buy Steves turbo. It's a helluva deal imo. Screw those holset junk turbos.

wheelhop · 03-19-2010

Quote:

Originally Posted by sleepydsm

I don't know. Lots of people on tuners have a theory of too small of oil drain, but I think that is bs. It's -10an. thats 5/8". And it's not from lack of oil, no signs when disected.

I might just have to get goat blowers 3575. But then I'd need a new 02 housing, change my IC pipe, intake, etc.

I will do some investigating. I'm getting a -4 inline with an 1/8npt fitting for an oil pressure gauge. I will also just make a much larger drain with like copper pipe or something.

Holset repair manual itself calls for a 19mm drain line as a MINIMUM. calling the manufacturers requirements bull shit?

-10an = 10/16 = less than 16mm diamete. About an . . .

Whats your oil pressure at idle 3K and redline?

4g63tcrazy · 01-13-2010

Posted it before and I'll post it again! Seeing what your oil pressure is that's entering the turbo is a very good idea.

Quote:

Originally Posted by wheelhop

This is your answer. Don't guess. DSMs kill SO many journal bearing garrett, BW, holset turbos. Because they are all more sensitive to oil changes and especially over oiling. And DSMs change their oil pressure per setup, rpm, motor build, oil pump age, Bshafts, oil pump years, oil cooling, hair part, shoe lace orientation, etc. FAR more than any other engine on the planet. PTE has a bad rep because of sh!tty DSM oiling problems. Its DSM oiling that sucks, not PTE (AKA garrett center sections). It's not the manufacturers fault. Its the haphazard, random oil pressures that dsms run on various setups.

Use any gauge: oil gauge, old fuel pressure gauge, old air compressor gauge, old water pressure gauge for home water feed lines, who cares. Get SOMETHING on there after the lines and restrictions to actually see what your oil pressure is. Rev the motor in neutral and find out the oil pressurea at idle, theoretical spool up rpm, and peak oil pressure (should be at redline). Per the holset repair manual for the hx35/hx40: Warmed up, the oil pressure for the hx35 and hx40 should be no less than 10psi at idle, and no more than 72 psi. It should be no less than 30psi at spooling time and after. A bolton hx35 sees 20psi at about 3700rpms and spools damn early so you had better have 30 psi at 2K or you could be eating turbo bearings. An bolton hx40 sess 20 psi as early as 4K on a 2.0L motor. Check your oil pressure. As stated, you MUST have 30psi during spooling up conditions with these turbos. And you cannot have more than 72 psi pressure at full song.