WB02

[JET]

I need a WB02 and I am looking for what you guys think is the best. It seems on EvoM that the Zeitronix is the best rated, but I didn't see much on the PLX or some of the newer ones. I will be grabbing one from MAP and I was looking for some input. It will be stand alone right now, but later hooked in to ECMlink probably.

[dsmghost]

The guys at ECMtuning recommend the Innovate LC-1 for use with ECMlink. Thats what I recently picked up, works great for me.

[niterydr]

NGK AFX probably has the most accurate heater control circuit and sensor available on the market. A standard 0-5V output means it can interface with most inputs, many ecu's utilize the EGR system as a way of monitoring.

AEM's systems are good, I run a dual channel on my stealth. I bought it for a song and dance on E-bay, otherwise I would have went with NGK AFX monitors. Calibration is key to success.

[turbotalon1g]

Originally Posted by niterydr

NGK AFX probably has the most accurate heater control circuit and sensor available on the market. A standard 0-5V output means it can interface with most inputs, many ecu's utilize the EGR system as a way of monitoring.

AEM's systems are good, I run a dual channel on my stealth. I bought it for a song and dance on E-bay, otherwise I would have went with NGK AFX monitors. Calibration is key to success.

X2.

[viridionplague]

Originally Posted by dsmghost

The guys at ECMtuning recommend the Innovate LC-1 for use with ECMlink. Thats what I recently picked up, works great for me.

+1

i got the MTX-L. it reads from 6-22, reads in .01 increments. 100% digital and is supposed to have the fastest (data rate) WBO2 on the market

http://www.innovatemotorsports.com/products/MTXL.php

[JET]

I have seen a lot of bad things about the LC-1, so that one I am for sure avoiding. I am checking in to getting an AEM, only downfall is that they use the older 4.2 sensor instead of the newer 4.9 ones and they seem to eat sensors a little more. For the price I am seeing they seem like a great deal though. Thanks everyone!

[EclipseGST]

I have a PLX and it works great... LCD display for added insurance to always know the AFR's. Monitors knock as well as EGT's. Never had an issue. have probably 5000 miles on it now, bought it used and never had any issues with the sensor yet.

[Halon]

I bought an uber cheap Depo brand WB from MAP back in the day. The gauge is a little slow but the 0-5v out updates fast which is the most important. I bought it mainly because it exactly matches the Prosport gauges. I'm happy with it.

I had a PLX in the talon and liked it as well. the display unit was a box rather than a round gauge so it fit nicely below the stereo. Didn't get another one because I wanted a round gauge for the Lexus.

[95talonracer]

I had an AEM wired in to EcmLink for logging and it always worked perfect for me.

[JET]

I ordered up an AEM, can't go wrong for $164 shipped! Thanks!