Correlation between g/rev and lb/min

dsm10sec · 08-11-2005

I've been running pocketlogger for about a year now and decided to see what mmcd/mmcd offshoot had to offer. I did a couple 2nd gear pulls and at about 4400 rpm my g/rev goes from 1.68 to 2.06 and my lb/min goes from 33.20 to 1.13 then gets back up to 25 by 6900. WTF is the deal?

slowbubblecar · 08-11-2005

You don't know how to tune?

dsm10sec · 08-11-2005

No wideband =/ I should probably hit up RS Motors soon.

**JET** · 08-11-2005

Or go to Elite and get it tuned right.

Matt D. · 08-11-2005

Quote:

Originally Posted by JET

Or go to Elite and get it tuned right.

Werd.

dsm10sec · 08-11-2005

I read somewhere that in FWD the motor runs leaner than when it's in AWD so when it's in AWD it's rich.. Is that truth or myth?

And, I've been thinking and looking at the logs... Obviously since my timing is going from 26* to 24* to 18* something's up.. Maybe switching into the next timing map? I only have a dsmchip and AFC. No eprom burner yet, maybe I should get one for timing.