Help with tranny

[TheLBUGAWD]

So drivin home from school, and tranny goes out. I have a tranny that needs to be rebuilt and swap with old one so neone who can help me with those would be a god send get back at me.
Ross-

[TheBlizzard]

You need to give more details, is it a five speed? What year car? Please update this with more information and make it easier to understand or I will delete it. Tick tick tick tick............

[rk4g63]

For a tranny rebuild - someone mentioned Shep does a good job. I think it was Jet. I vaguely remember it was 895$ for a full rebuild with double synchros in second and cost of gears extra.

[cudvig]

I can help with this sorta.

its a 91 AWD 5 speed, he wants something cheap. I told him to get ahold of shindley. he wants a basic rebuild for cheap in a short amount of time. not something for shep to do.


-Colin

[rk4g63]

so did I get it right? was it shep who does the best job?

[Outlaw1]

What exactly went out? Does it not go into a gear? Does it pop out of a gear? Did the slave or master go out? Details.

[cudvig]

his 2nd gear has been grinding really bad.

he said he heard a pop pop pop and saw shit coming out like metal shit behind his car.

-Colin

[TheBlizzard]

Well is his bellhousing cracked?

[TheLBUGAWD]

I really dont kno, i goes in gear but when u start to give it gas and go it starts to make noise and jerk alot so... i dont kno really

[Onefast99gsx]

Based on the last post before me it sounds like you sheared off several teeth on either the intermediate or output shaft, possibly both. I've went through 4 FWD trannies. Sounds like yours is AWD but it can happen to those too.

When the car is in neutral, is it very hard to move? On one of my breaks, in neutral i could push the car backward but not forward whatsoever.

If you saw metal stuff flying, then your case is cracked. Sounds like you need a new tranny. If you're mechanically inclined, changing a tranny isn't the worst job(although i hate it everytime).

[TheLBUGAWD]

Yeah shit was fallin out of the back of my car. It can roll fine its when i try to go it alomost jumps as it moves neutral works fine

[rk4g63]

Need a new tranny. If stuff came out the casing, the casing may not be repairable.

[Pimpin Dsmstyle]

Originally Posted by rk4g63

Need a new tranny. If stuff came out the casing, the casing may not be repairable.

If shit flew out of the case, it's basically NOT repairable period. Nor would it be worth it in anyones lifetime. I "sold" a tranny that works but needs a 2nd gear for 75 with Tase, and I will be selling another in similar condition but its 2nd gear synch that is bad for 100 with Tcase.

Shindley seems to be hit or miss. At least you know what your buying when you go with shep.

[cudvig]

shindley isnt hit or miss man....

have you gotten anything done by him?


-Colin

[Pimpin Dsmstyle]

Originally Posted by cudvig

shindley isnt hit or miss man....

have you gotten anything done by him?


-Colin

Nope and I will never even try it. Why have him build an engine? I have mike or other ppl for that. Why have him build me a tranny when Shep is a for sure thing?

Notice the word "seems" to be hit or miss.

[TheLBUGAWD]

ok so i have a spare tranny that i bought from colin, he said that he think it only needs a 4th gear fork but i cant tell so if some can help me figure it out that would help alot and if u guys kno nebody that can help the trannies for me please tell me
Thanks ross

[cudvig]

its a 3rd gear shift fork.

just ask for shindley man, you dont have time for TRE or Shep.


-Colin

[JET]

Originally Posted by cudvig

shindley isnt hit or miss man....

have you gotten anything done by him?


-Colin

Yes, and he is hit or miss.

[niterydr]

Uhh....Shindley is retired guys, he told us this at the cookout.

[TheLBUGAWD]

I dont need a tranny i need the one i have to be fixed and swapped with the one in the car, and is shindley for sure done with cars?