What injectors are you running?

[eclipse97gs-t]

I’m curious what size and brand injectors everyone is using. I’m looking at FIC 750cc or 850 even though those injector calculators tell me I need over 1000cc but that seems like overkill.

[blageo23]

FIC 650cc, May be upgrading to FIC 1000cc

[scheides]

What size turbo are you going to run, and on what size motor (stock, stroker, etc?). Also, what fuel do you plan to run on?

I've always gone for the standard 650cc injectors but I've only run 20G turbos and pump gas. If you're going to run anything bigger, high boost, or E85 I'd suggest bigger injectors. I'm currently maxed out on my stock 560's on my evo. I'll probably upgrade to 880's in case I decide to run E85.

[HiImBrian]

PTE 680s on my 50 trim.

[Shane@DBPerformance]

Holley Double Pumper

[niterydr]

880's now, 1600's soon.

[FattyBoomBatty]

Originally Posted by ecoli

Holley Double Pumper

I will be using 750's. I was using a 700 and a 1000, but no more!

[DBMajik]

Originally Posted by eclipse97gs-t

I’m curious what size and brand injectors everyone is using. I’m looking at FIC 750cc or 850 even though those injector calculators tell me I need over 1000cc but that seems like overkill.

I'll sell ya my FIC 750s for $275.

[b00stcreep21]

What setup are you running where you think you'll need 1000cc injectors? I'm gonna go ahead and assume e85....?

[Goat Blower]

Hilborn stacks.

[Halon]

Right now I have FIC 650's, but my new PTE 1600's will be replacing them soon as I get home.

[JET]

I have been running FIC 950's, but am going to 1600's this year for E85 use.

[9guy9]

I've got a set of FIC 850's I would sell ya.

I too am going 1600 for Korn

[eclipse97gs-t]

crower rods
je pistons
oversize valves
HKS 272 cams
AEM standalone EMS
AEM adjustable cam gears
AEM high flow fuel rail with adjustable regulator
Walbro 255 hi-flow fuel pump
550 cc injectors (currently and hit fuel cut)
20g turbo
Greddy large front mount intercooler
RRE upper and lower pipes
Custom 3” downpipe to full 3” exhaust with apexi n1 catback
3" hi-flow cat

Not E85, 92. What’s up with everyone running E85?

[EclipseGST]

8 - PTE1600's

[Pushit2.0]

If you do not plan on putting a bigger turbo on the car anytime soon I would buy 880s. I have 4 1600s to start, I am sure more will be added later.

~John

[eclipse97gs-t]

Everyone has a different opinion on injector size its driving me crazy. Some people say you will never max out 650s with a 50 trim and some people say get 880s or 1000cc for a 20g. fuel injector calculators tell you over 1000cc for 400hp with 4 injectors in a turbo application. Every time I think I’ve decided on what I’m going to get I hear something different. I am planning on a turbo upgrade but not for a few years so I’m not just trying to get the best injectors for the 20g. Any input would be awesome.

[scheides]

If thats the case, then just get some 650's and run them for a while. If you are lucky enough to max them out, then just upgrade.

[A//// Guy]

I think Im running 24lb injectors.

[JET]

If you are running an AEM then you might as well get some decent sized injectors, get some 850's, 950's or 1000's. Whatever you can find a good deal on.