Datalogger

larryr · 08-09-2004

Questions for people doing DataLogging ??

What do you have for a setup? Softare/ what palmpilot ?

Anyone running a PC Based Software ?

Thanks...

lr

JustROLLIN · 08-10-2004

There is a free software you can download. One is called TunerStein I believe and the other is called MMCD I believe. All you need is the wire that runs from the serial port on your PC and some sort of sync software to install the program onto a PDA. Once on the PDA double click it.

You will also need the logger cable for your car's diagnostic port.

john · 08-10-2004

I am running TMO software on my laptop. I recommend it.

Matt D. · 08-10-2004

TunerStein (PDA and PC versions) - http://students.db.erau.edu/~szabafab/stein/

MMCD (Palm only) - http://mmcdlogger.sourceforge.net/

**Halon** · 08-10-2004

i just picked me up an m100 for 10 bux shipped! I'm going as cheap as possible. Prolly gunna run that freeware stuff.

**Kracka** · 08-10-2004

I ran the PocketLogger software on a Palm M105. I tried out that freeware stuff just to see what it was like and it sucked. It was always crashing and locking my Palm up, and even when it didn't it wouldn't work quite right ever. The PocketLogger software was great, very stable and lots of nice little features.

larryr · 08-10-2004

I actually have a computer in my car so, if i could find pc based one that would be cool...

Video Clip of Screen...

-lr

:woowoo:

larryr · 08-10-2004

damn that TMO Software is expensive, 300$ is it that good ?

JustROLLIN · 08-10-2004

Damn, you big balln Larry.

Chris,

Which software were you running? TunerStein or MMCD and how long ago was this?

**Kracka** · 08-11-2004

I tried both of those shitty freeware programs and went right back to the PocketLogger software from Digital Tuning since it actually worked.

1slowdsm · 08-11-2004

What exactly do I need for the whole datalogging set up? I'm thinking about getting one soon, but I need to get all the info on it first. All I know so far is what is on this page, so I have quite a ways to go.

1slowdsm · 08-12-2004

Does anyone know of the Zire 21 Handheld Organizer? Is that any good to use for datalogging? I'm trying to look for something cheap that will work.

Okay, forget that one up there. I just got done looking at the compatibility chart and I guess that one doesnt work with the PocketLogger. All the ones that work are like $$$ as heck! :headache: Anyone still know of any cheap PDAs? :bounce:

larryr · 08-12-2004

Does anyone have a good diagram for making the cord for dataloggin ? I am going to be using a PC for the loggin, I believe you use a serial cable if I am right, then u can just put some electrical ends on it and clip it to the proper terminals in the diag port ?

Thanks -

lr

illz · 08-12-2004

The best, most compatible handheld for 1G/2G logging and even DSMLink is the Palm IIIc

you can find them on ebay for dirt cheap. i picked up mine like new almost 2 years ago for $100

then get a serial modem cable from syncablesolutions.com for $20 and you are all set

well, that and getting a proper ALDL cable (1G) or ODBII cable (2G) .. i think i have an OBDII cable around if you want to buy it

1slowdsm · 08-12-2004

Quote:

Originally posted by illz@Aug 12 2004, 03:47 PM
The best, most compatible handheld for 1G/2G logging and even DSMLink is the Palm IIIc

you can find them on ebay for dirt cheap. i picked up mine like new almost 2 years ago for $100

then get a serial modem cable from syncablesolutions.com for $20 and you are all set

well, that and getting a proper ALDL cable (1G) or ODBII cable (2G) .. i think i have an OBDII cable around if you want to buy it

Whoa, thats not a bad deal. I thought I would have to end up spending $400 on a Datalogger. How does that set-up work for you? I'm still trying to get as many opinions as I can before I start spending.
Oh yeah...what is that ALDL cable you're talking about. I'm guessing it has the word DataLogging in there somewhere, right?

illz · 08-12-2004

Quote:

Originally posted by 1slowdsm+Aug 12 2004, 08:42 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (1slowdsm @ Aug 12 2004, 08:42 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-illz@Aug 12 2004, 03:47 PM
The best, most compatible handheld for 1G/2G logging and even DSMLink is the Palm IIIc

you can find them on ebay for dirt cheap. i picked up mine like new almost 2 years ago for $100

then get a serial modem cable from syncablesolutions.com for $20 and you are all set

well, that and getting a proper ALDL cable (1G) or ODBII cable (2G) .. i think i have an OBDII cable around if you want to buy it

Whoa, thats not a bad deal. I thought I would have to end up spending $400 on a Datalogger. How does that set-up work for you? I'm still trying to get as many opinions as I can before I start spending.
Oh yeah...what is that ALDL cable you're talking about. I'm guessing it has the word DataLogging in there somewhere, right?

[/b][/quote]
the aldl cable is what connects to the diagnostic connector of your 1G. i checked on ebay, palm IIIc's are going for like $50. Go to pocketlogger.com and buy their "DSM Pocketlogger" cable and software package for $125, and you're good to go.

Alternatively, you can buy a DSM/ALDL logger cable off ebay for really cheap and use the MMCD software, which is free.

Aside from the ALDL/DSM logger cable and software though, yes, all you need is the Palm IIIc and a modem cable from syncablesolutions.com

1slowdsm · 08-13-2004

So I'll be spending about a little over $200. Thats a whole lot better than spending $400 on that other stuff I had in mind, haha.

How important is that Datalogger? If its not all that important right now, then I'll have to wait a few months to get one up and running. Unless its a MUST, then I'll have to get it next.

08-14-2004

I have a couple of cables laying around. I'll ship one to your door for $22.00. I'll even throw in the software on a cd for ya seeing as how I have already got them burned also.

1slowdsm · 08-14-2004

Quote:

Originally posted by weshole@Aug 14 2004, 07:18 AM
I have a couple of cables laying around. I'll ship one to your door for $22.00. I'll even throw in the software on a cd for ya seeing as how I have already got them burned also.

So you're talking about the ALDL Datalogging cables and that software? Its not broken or anything is it? Twenty-Two bucks doesnt sound too bad, after I get that all I need to get is the Palm IIIc right? I still dont know how soon its going to be until I get that Palm IIIC, with all the stuff I need to get for school/car and all it might be a while. But I can still get that cable and software now so I wont have to worry about it later. I'll think about it, give me a few days.

08-15-2004

It's should plug right into it's hotsync cable just like my m100. actually I have the MMCD freeware and have used it without any issues at all. Let me know when you want one and I'll get ya taken care of.