NLTS on v2.5

[CornFed2.4]

Can anyone back up what Ive read? From the looks of it it will work. What I need to do is splice the red and black wires at the cruise switch and hook the wire up to pin 91 on the ecu. I did research just want to confirm. Or someone find a better diagram of what to do and post it.

Thanks in advance.

[turbotalon1g]

I just tried to search for you and I couldn't find anything. I can't believe I didn't find anything on teh forums.

[CornFed2.4]

Aaron this is what I found but its v3

http://www.dsmtuners.com/forums/arti...all-setup.html

Wouldnt it be the same for v2.5. I guess thats my question.

[turbotalon1g]

Oh, yeah I'm pretty sure nothing changed for the wiring between the versions.
Plus it won't fuck anything if it isn't, the only side effect from this is that you lose the ability to stop cruise control by stepping on teh clutch I believe.

Do it up, let me know how it goes.

[95talonracer]

You splice the clutch switch wire down by the clutch pedal.

[C3L1CA]

http://www.ecmtuning.com/downloads/d...structions.pdf

I used that how to when wiring mine up. Worked on my v2 and v3.

[CornFed2.4]

Thanks guys I'll do this tomorrow as well as install my wideband.

[TalonFiero]

Did I give you the DSMLink packaging? If not, I have the supplied NLTS clutch wire harness Link gave me years ago in the garage.