Tourqe specs?

[Capinoy123]

Does anybody have all the tourqe specs for the 4G63T motor? Or know where i can get them besides the gay chiltons or haynes manuals?

[User Name]

www.vfaq.com has some specs, but they're hard to find.

Try www.plymouthlaser.com for some of them.

I believe there is a "CAPS" out there for DSM's. But I can't find the link anymore.

[mdost03]

What's wrong with Haynes manual?

[Goat Blower]

CAPS is a parts lookup program that Mitsu uses, lots of us have it. It doesn't have torque specs. Use the Haynes, it's fine.

[User Name]

Originally Posted by Goat Blower

CAPS is a parts lookup program that Mitsu uses, lots of us have it. It doesn't have torque specs. Use the Haynes, it's fine.

Ahh, Thanks. Could you link me to it? Or somebody? I could use this.

[Capinoy123]

ok i guess the haynes manual will do..

[AwdGSX13]

If you want to come down to eagan im sure i can print them all off for you using Mitchell On Demand. Otherwise just buy a haynes this most likely wont be the only time you will need these specs.

[Pushit2.0]

How about the DSM cd? or what were you looking for?

~John

[joesushi]

In my chiltons manual it doesnt state a final torque spec for the crank bearing caps. it uses a low torque value then says finish with a 1/4 turn. I am looking for the torque specs on:

crank bearing caps
rod bearing caps
and the recommended torqueing sequence when using a stock mitsu composite headgasket.

[sleepydsm]

All that info is in the Chilton...

[Pushit2.0]

What year engine and are they factory parts you are installing?

~John

[brando]

always use a chilton manual. hayne's sucks. they leave stuff like that out

[CarPsyco84]

alldatapro told me 34-36 ft lbs for the rod caps...