MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > The Good Stuff

Reply
 
Thread Tools Display Modes
Old 02-16-2009   #1
polishmafia
Smells like cat poop
 
polishmafia's Avatar
 

Join Date: Feb 2007
Location: maple grove
Drives: an evo's fat korean cousin
Posts: 2,549
How to Read Your Tires

Over the last couple of weeks, I've had a few PMs asking about tires. I thought I should do a quick write-up on how to read your tires and what the information on them means.

Tire Size

On every tire, the size is written is in a three part format.

For example, alot of stock Mitsus come with the tire size 205 55 16.

Part 1 - 205 - This is the width of the tread, in millimeters.

Moving to a 215 tire means the tread is 10 millimeters wider than a 205.

Part 2 - 55 - This is the aspect ratio

This equals the sidewall height, in aspect to the width of the tire. In this example, the sidewall height is 55% of the tire's width.

Part 3 - 16 - This, in inches, is the rim diameter.

If you are thinking about getting a set of tires that are not the stock size, you can use a few online tire calculators to get information about the new size versus the old size. Here are a couple links.

http://www.1010tires.com/tiresizecalculator.asp
http://www.tiresizecalculator.info/
http://www.miata.net/garage/tirecalc.html

Load Index and Speed Index

Normally, after the tire size, are a couple of other numbers. This is the tire's load and speed rating.

The first number is the Load Index. The load rating basically means, per tire, what that tire is rated for weight.

Please refer to this chart of tirerack.com for specific ratings.

http://www.tirerack.com/tires/tirete....jsp?techid=35

The second number is the speed index. This is the (recommended) maximum speed that this tire should ever travel at. We all know here that none of us ever go over the posted speed limit , but this is good information to know.

M - 81 mph
N - 87 mph
P - 93 mph
Q - 99 mph
R - 106 mph
S - 112 mph
T - 118 mph
U - 124 mph
H - 130 mph
V - 149 mph

DOT Codes

On every tire sold in the US is a set of number and letters (up to 12 characters in length).

For example MT1B 18HR 4808

The first two sets of characters are codes that denote the manufacturer of tire, and the plant is was made in.

The third set of characters can be very important when purchasing new tires. The third set of characters will always be numbers. This is the week of the year and the year the tire was manufactured.

4808 means the tire was manufactured during the 48th week of 2008.

Prior to 2000, some DOT codes just ended with one number. 349 would mean the tire was manufactured during the 34th week of 1999.

Before buying a set of tires, any reputable shop will let you look at the DOT codes before you purchase them.

Arguments about buying a tire that was constructed more than a couple of years ago go both ways. Some people state that older tires have no problems, while others say that older tires may be brittle. I personally agree with the latter. I would not purchase a tire that is a couple of years old and never mounted.

UTQG

This stands for Uniform Tire Quality Grading, which is a rating system developed by the Department of Transportation.

The following is taken from Goodyear.com

Quote:
Originally Posted by Goodyear.com
Tread Wear

More Than 100 - Better
100 - Baseline
Less Than 100 - Poorer

The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test track. A tire graded 200 would wear twice as long on the government test track as one graded 100. Your actual tire mileage depends upon the conditions of their use and may vary due to driving habits, service practices, differences in road characteristics and climate. Note: Tread wear grades are valid only for comparisons within a manufacturer's product line. They are not valid for comparisons between manufacturers.

Traction

A - Best
B - Intermediate
C - Acceptable

Traction grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. The Traction grade is based upon "straight ahead" braking tests; it does not indicate cornering ability.

Temperature

A - Best
B - Intermediate
C - Acceptable

The temperature grades represent the tire's resistance to the generation of heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperatures can cause the materials of the tire to degenerate and thus reduce tire life. Excessive temperatures can lead to tire failure. Federal law requires that all tires meet at least the minimal requirements of Grade C.
Maximum Tire Pressure

Lastly, just because I get alot of questions about this at the shop, this is the maximum tire pressure rated for the tire. This is not the pressure the tire is supposed to be normally inflated to. This is the maximum pressure that the tire can safely hold.

On most vehicles, the recommended tire pressure for a vehicle is listed on a sticker in the driver's door jam, or can be found in the vehicle's owner's manual.

Any questions, feel free to ask.
polishmafia is offline   Reply With Quote
Old 02-16-2009   #2
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: How to Read Your Tires

Good info!
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 02-16-2009   #3
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: How to Read Your Tires

Thanks Pete!
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is online now   Reply With Quote
Old 02-16-2009   #4
1QUICK4
Crash Course Racing
 
1QUICK4's Avatar
 

Join Date: Oct 2003
Location: Skid Row
Drives: in circles
Posts: 2,623
Send a message via Yahoo to 1QUICK4
Re: How to Read Your Tires

Good info

Sticky icky this biatch!
1QUICK4 is offline   Reply With Quote
Old 02-16-2009   #5
Kracka
R U DTF bro?
 
Kracka's Avatar
 

Join Date: Aug 2003
Location: Oak Point, TX
Drives: C8 Stingray Z51
Posts: 20,620
Re: How to Read Your Tires

Quote:
Originally Posted by 1QUICK4 View Post
Sticky icky this biatch!
Done
__________________
Quote:
Originally Posted by Murlo26 View Post
I agree with Kracka.
Kracka is online now   Reply With Quote
Old 02-17-2009   #6
A//// Guy
 
A//// Guy's Avatar
 
Bloody Seal Bounce Champion!
Join Date: Oct 2003
Location: South Burbs
Drives: Slowly
Posts: 9,870
Re: How to Read Your Tires

This is good info! Thanks for the writeup Piotrek.
A//// Guy is offline   Reply With Quote
Old 02-17-2009   #7
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: How to Read Your Tires

You are the mutha f(*kin man!
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.