MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 11-24-2005   #1
4G63Spyder
New Member
 
4G63Spyder's Avatar
 

Join Date: Oct 2005
Posts: 29
NX Intercooler

Just in case you've never heard of it/seen it used...I want to say this is one badass modification and definitely worth every penny!

I installed my own, with no nitrous experience before...it's actually very simple, just follow the instructions in the book. If you can install a car stereo, you can do this, trust me. My only suggestion different from the book...get some long zipties to attach it to your FMIC...and use like six of em so it doesn't move around.

I had the following mods when I put it up on the dyno: Greddy Intake, Greddy 18G, Greddy FMIC with hard pipes, 2.5" custom cat-back, boost control solonoid restrictor removed, and of course, the sprayer. Stock boost control, stock injectors, stock almost everything else.

First run without spray: 229 whp, 220 ft/lbs
Second run with spray: 273 whp, 266 ft/lbs

WOW! All this while still running rich (10:1) on a mostly stock setup.
__________________
Team 3M TA3
Ban bad drivers, not fast cars



4G63Spyder is offline   Reply With Quote
Old 11-24-2005   #2
slowbubblecar
Big Turbo Monster
 
slowbubblecar's Avatar
 

Join Date: Oct 2003
Location: Hopkins
Drives: GTS and E55
Posts: 1,105
Re: NX Intercooler

what boost were you running?
__________________
Life's tough.... it's even tougher if you're stupid.

7/25/09
Motorcycle cop pulls up next to me on UNI and says "Want to race?"
Me- "I don't think you would stand a chance."
Cop says "probably not" and drives off.
slowbubblecar is offline   Reply With Quote
Old 11-24-2005   #3
blageo23
AWD4G64
 
blageo23's Avatar
 

Join Date: Jun 2004
Location: Shoreview, MN
Posts: 2,286
Send a message via AIM to blageo23
Re: NX Intercooler

Quote:
Originally Posted by 4G63Spyder
Stock boost control, stock injectors, stock almost everything else.
HMMMM I wonder... HAHA. Did you get the little circle one? or is that the "Snake" one?

Last edited by blageo23; 11-24-2005 at 08:51 AM..
blageo23 is offline   Reply With Quote
Old 11-24-2005   #4
Matt D.
Shit Rocket Pilot
 
Matt D.'s Avatar
 

Join Date: Oct 2003
Location: Shoreview, MN
Drives: 2003 Evolution VIII
Posts: 7,752
Send a message via ICQ to Matt D. Send a message via AIM to Matt D. Send a message via MSN to Matt D. Send a message via Yahoo to Matt D.
Re: NX Intercooler

The only thing I don't buy with these and their associated dyno sheets is that who's saying that the nitrous isn't being ingested by the engine which is helping increased the power gains? I guess I'd have to see the before and after intake temps to even begin to make a decent opinion.
__________________
"If everything seems under control, you're just not going fast enough." -Mario Andretti


03 Mitsubishi Lancer Evolution VIII
Quote:
Originally Posted by Tachyon View Post
Every minute you spend in your Evo, not in boost, is a minute of your life you'll never get back.
Matt D. is offline   Reply With Quote
Old 11-24-2005   #5
4G63Spyder
New Member
 
4G63Spyder's Avatar
 

Join Date: Oct 2005
Posts: 29
Re: NX Intercooler

Well, watching the video, it is plain to see that yes, there is some nitrous being sucked into the intake...however, I was still running rich on the second run...and I was running 18 psi! It is the circle (more like oval) sprayer...
__________________
Team 3M TA3
Ban bad drivers, not fast cars



4G63Spyder is offline   Reply With Quote
Old 11-24-2005   #6
scheides
flips McGee
 
scheides's Avatar
Re: NX Intercooler

I don't know....if you're going to take the time to run all that nitrous, why not just put it straight into the intake, where it belongs? Why not run water/alcohol injection if you want lower intake temps? it's cheaper and less volatle.

Still, cool results. Got any dyno sheets for that? At 273whp, your injectors must be at about 110%, eh?
scheides is offline   Reply With Quote
Old 11-24-2005   #7
4G63Spyder
New Member
 
4G63Spyder's Avatar
 

Join Date: Oct 2005
Posts: 29
Re: NX Intercooler

not sure...no way for me to find out (no datalogging). I'll see if I can post the dyno sheet later...

Going to get 550's later on...just need the $
__________________
Team 3M TA3
Ban bad drivers, not fast cars



4G63Spyder is offline   Reply With Quote
Old 11-24-2005   #8
slowbubblecar
Big Turbo Monster
 
slowbubblecar's Avatar
 

Join Date: Oct 2003
Location: Hopkins
Drives: GTS and E55
Posts: 1,105
Re: NX Intercooler

it is odd to buy a nx kit and bigger turbo before buying injectors IMO.
__________________
Life's tough.... it's even tougher if you're stupid.

7/25/09
Motorcycle cop pulls up next to me on UNI and says "Want to race?"
Me- "I don't think you would stand a chance."
Cop says "probably not" and drives off.
slowbubblecar is offline   Reply With Quote
Old 11-24-2005   #9
sleepydsm
Kevin
 
sleepydsm's Avatar
 

Join Date: Jan 2004
Location: Shoreview
Posts: 3,356
Send a message via AIM to sleepydsm
Re: NX Intercooler

Isn't he talking about the NX Intercooler Sprayer kit? How could that possibly be dangerous?
sleepydsm is offline   Reply With Quote
Old 11-25-2005   #10
CVD
Sten Sniper
 
CVD's Avatar
 

Join Date: Oct 2003
Location: New Hope
Drives: Evo VIII RS
Posts: 1,385
Send a message via AIM to CVD
Re: NX Intercooler

Because the intake eats an unknown quantity of the nitrous sprayed on the intercooler. Although I wouldnt exactly call it very "dangerous" and I dont think anyone else here did either.
CVD is offline   Reply With Quote
Old 11-25-2005   #11
CarPsyco84
 
CarPsyco84's Avatar
 

Join Date: Jan 2005
Location: Coon Rapids
Drives: 07' Z06, 16' Beta 300RR
Posts: 804
Re: NX Intercooler

Don't be silly, just shoot spray IN the UICP, with some fuel, and then you get colder intake temp, and more oxygen... course I could be the first person on here to blow a motor on a lil 16G...
__________________
-When in doubt, Moar RPM.
CarPsyco84 is offline   Reply With Quote
Old 11-25-2005   #12
4G63Spyder
New Member
 
4G63Spyder's Avatar
 

Join Date: Oct 2005
Posts: 29
Re: NX Intercooler

Well, the sprayer and turbo sor tof fell into my lap...couldn't pass them up. Course, now I've gotten rid of the 18G, and have a 16G ported and clipped on the way (hated the lag of the 18G). Also doing the following before the car goes into boost again:

550's (gotta get em still..anyone got some for sale?)
SAFC-II (got it)
Turbo XS dual stage Boost control (Got it)
full 3" turbo back (anyone got a deal on all/part of one PM me...I'm interested! I'm looking to get rid of the cat anyway....so....)

The SAFC will be put in by a shop, as I don't plan on blowing up my motor all by myself...I want professional help!
__________________
Team 3M TA3
Ban bad drivers, not fast cars



4G63Spyder is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.