Brand new revised Forrester Intake Manifold's

[spoolin d dub]

delete

[jrohner]

Sparks my interest. Know of any reviews or dyno charts with these?

[spoolin d dub]

Originally Posted by jrohner

Sparks my interest. Know of any reviews or dyno charts with these?

I've ran a regular Forrester and now have a modified one on my car. I had very minimal lowend loss but great mid/topend power. Personally I still think this is the best intake manifold for our cars.

here is my car at 30psi on my old 70mm turbo without a 2step and a bad launch.

http://www.youtube.com/watch?v=Y75glcCYj6w






Mike Reichen made over 1044awhp with one.

http://www.youtube.com/watch?v=O4RRe...layer_embedded

[turbotalon1g]

Originally Posted by spoolin d dub

I've ran a regular Forrester and now have a modified one on my car. I had very minimal lowend loss but great mid/topend power. Personally I still think this is the best intake manifold for our cars.

here is my car at 30psi on my old 70mm turbo without a 2step and a bad launch.

http://www.youtube.com/watch?v=Y75glcCYj6w






Mike Reichen made over 1044awhp with one.

http://www.youtube.com/watch?v=O4RRe...layer_embedded

No solid dyno numbers/comparisons or flow bench numbers?

The price seems good

[spoolin d dub]

Originally Posted by turbotalon1g

No solid dyno numbers/comparisons or flow bench numbers?

The price seems good

I have no back to back dyno numbers. The manifolds are not new to the market. If you search the net you will find info on them. They are well proven. My turbo was 70mm with a 71mm turbine and on the street I was getting positive boost by 3400rpm!!

my car at 31psi with 4 spyder diff ,no 2step on street tires. 10.5 at 135mph
http://www.youtube.com/watch?v=kWyaCItZA_c

2g dsm
http://www.mitsu-media.com/showthread.php?t=9233

a friends evo 2 with forrester intake manifold from 2007 (his car is why I got the manifold)
mpt70 700hp dynojet
street tires at track
http://www.youtube.com/watch?v=asq0fP4KoaU

same evo2 same forrester intake manifold 2011
bws400 74mm 746whp on buschurs mustang dyno
street tires at track.
http://www.youtube.com/watch?v=A0Zrr...&feature=share



for the price this is a steal!!!

[spoolin d dub]

98 GSX
Mods on the GSX:

6-bolt block with Eagle H beam rods
Ross Pistons
ARP hardware
Bored .30 over
Magnafluxed and Micropolished crank
New oil pan
New front case
New timing accessories
1g cylinder head
SI/Manley dual springs
Titanium retainers
SS valves
Mitsu 4-layer metal head gasket
ARP head studs
Comp full race cams
Forrester intake manifold
780cc Injectors
Cosmo 302lph fuel pump
6-AN Fuel lines
Aeromotive FPR
SBR Garrett FMIC with 2.5" Piping
Tial BOV
AGP Custom 50 trim turbo setup
Turbonetics Evolution wastegate
3" Exhaust
Southbend 2600lb clutch
ACT flywheel
AEM Engine Management System
Innovate motorsports wideband
Prothane Motor Mount Inserts

vs

Silverado w/76mm turbo 750whp

http://www.youtube.com/watch?v=AnKWMHb5ecU

The manifold WORKS!!

[spoolin d dub]

I've had request for more pics so here are a few. As you can see these are brand new!

[DSMPARTSGURU]

no injector bosses?

[Perkul8r]

Originally Posted by DSMPARTSGURU

no injector bosses?

The injectors go into the head, not the intake.

[spoolin d dub]

Originally Posted by DSMPARTSGURU

no injector bosses?

No injectors lol. But they come setup with bungs to run nitrous for all the auto guys.

[spoolin d dub]

2 manifolds pending sale. Have 1 stock tb flange left. Come and get it lol!!

[spoolin d dub]

manifolds sold. 3 more in the pipeline!! Best deal on quality intake mani's. Don't pass them up lol.

stock tb


mustang tb

[spoolin d dub]

All three manifolds were sold. I have 3 more!!! One of the Best damn designed manifolds ever for the DSM. Period!! Mike Reichen broke the mile record going 237mph with a plain jane Forrester!!!

http://www.youtube.com/watch?v=1-jdEj5eMcM

This is a steal for the price.!!!

[spoolin d dub]

delete

[spoolin d dub]

delete

[Gvr-4]

Is this for the stock TB?

[spoolin d dub]

Stock and mustang tb.


And stop lowballing me people. don't get it twisted. I do not need your money. I got these to help out the lil guy that cant afford or is being raped by purchasing a expensive jmf drag etc. but still wants a proven intake manifold that is just as good.

[derrecks92talontsi]

Do you still have them and how are they on the street with a small turbo.

[spoolin d dub]

Originally Posted by derrecks92talontsi

Do you still have them and how are they on the street with a small turbo.

I have a few left. They were tested with a 14b back in the day and showed gains across the entire dyno. These are not a new part on the scene. Most just are to young to know about the history of the Forrester intake manifold but i'd put this against the best new race intake manifold and it'll be on that level.

I recently asked for feed back from people. I got this from one guy on 7-9-12 . He has a 35r.

LOVE IT BRO,RAN OUR FASTEST TIME WITH THIS CAR IN THE 1/8TH SO FAR AND WITHOUT EVEN RE DYNO'ING THE CAR,ITS MAKING MORE POWER THAN THE MAGNUS WE HAD ON THERE THATS FOR SURE

[spoolin d dub]

delete